Copeland Compressor 3DB3A1000-TFC

08/13/2020

The phenomenon that the pressure switch of automobile air conditioner is broken

Poor contact of the contacts or malfunction of the pressure switch causes the compressor to fail or fail to function as a normal pressure protection.

08/27/2020

Maintenance method and practice of air compressor electrical equipment

There are many commonly used electrical equipment, such as circuit breakers, contactors, relays, thermal relays, switches, etc., these are hard circuits, in addition to PLC, etc., these equipment is very widely used in air compressors and station rooms, it can be said to be necessity.

06/30/2020

Broken suction valve of Bristol compressor

Broken suction valve of Bristol compressor A Bristol compressor is a machine that compresses gas. Generally, the piston compresses gas 1450 times per minute (half-sealed compressor) or 2900 times (full-sealed compressor), that is, the time to complete an intake or exhaust process is 0.02 seconds or even shorter.

08/12/2020

Matters needing attention when choosing evaporator for chiller

The evaporator is one of the four major components of the refrigeration system, and it is the ultimate manifestation of the cooling effect and efficiency. The evaporator is generally designed and equipped by the chiller manufacturer

04/29/2025

Difference between AC, DC and EC Fans

AC fans, DC fans and EC fans are classified according to their power supply type and motor type respectively. They differ in drive method, performance and application range.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

08/11/2020

Four major issues to be considered in the cold storage design process

1. Cold storage volume<br></br> 　　The size of the cold storage should be calculated based on the volume that the stored products must occupy in the cold storage, plus the aisles between rows, the space between the stack and the wall, ceiling

06/14/2020

Cause Analysis of Refrigeration Compressor Cannot Start or Stop Quickly After Start2

1) First check the main circuit. Whether the power supply has power, whether the voltage is normal, whether the fuse has been blown due to starting overload, whether the air switch has tripped, whether the switch contacts are good, and whether the power s器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧҄識�僬㣢ᐲ臆S㥲ᐲᬄğ識

07/16/2020

Compressor overheating

The compressor is overheated, causing it to stop shortly after start-up (protector action). Please check whether it is:; Insufficient or excessive refrigerant, please fill the leak and evacuate, add enough refrigerant or release excess refrigerant. The capillary assembly (including the filter) is clogged and the suction temperature rises. Please replace the capillary assembly.

01/05/2021

Real Gas Model for an Electric Swashplate Refrigeration Compressor

Real Gas Model for an Electric Swashplate Refrigeration Compressor Author links open overlay panelMohammadArqam1Dzung VietDao1AmirJahangiri2MarkMitchell2PeterWoodfield1 1 School of Engineering and Built Environment, Griffith University, Australia 2 U器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦