Copeland Compressor 4DK3A150E-TSE-001

07/05/2022

8 Common Concerns about Magnet Pumps

Magnet pumps are very different from typical sealed pumps. Therefore, it is natural for people to have concerns. I narrowed the list to 8 questions that are commonly asked with regard to mag-drive pumps.

09/11/2020

Ways to reduce bearing noise

Ways to reduce bearing noise (1) Method of using chemical additives Adding certain chemical additives to the bearing lubricant can reduce bearing noise. For example, a low-noise grease containing noise-reducing additives produced by a factory in Tianjin can reduce bearing noise by 3.9-9.2dB from the original basis. , Suitable for use in miniature or small bearings.

06/14/2020

Maintenance and repair of refrigeration compressors

1.Pay attention to the oil surface of the oil mirror of the compressor, and ensure that the oil surface is within the range specified by the oil mirror. If the compressor lacks oil, it will cause chain failures such as seizure, shaft wrapping and burning 器2

02/15/2022

Factors Affecting Service Life of the Air Compressor Oil

Maintaining the air compressor oil is critical to the compressor’s performance.

06/29/2020

How the compressor works

02/24/2023

The Differences Between Butterfly Valve and Ball Valve

The biggest difference between butterfly valve and ball valve is that the opening and closing part of butterfly valve is a plate, while the ball valve is a ball.

01/02/2025

FANUC Spindle Amplifier Alarm Codes and Solutions (3)

The following is a continuation of the previous article, and introduces FANUC spindle drive alarm codes 47-73.

08/10/2020

Four anti-corrosion methods for heat exchangers

There are four main anti-corrosion methods for heat exchangers: corrosion-resistant materials, electrochemical protection, adding corrosion inhibitors, and anti-corrosion coating methods.

08/19/2020

The importance of industrial chiller sealing and the hazards of entering air

During the use of industrial chillers, there are many factors that will cause the equipment to deteriorate. At this time, it is necessary for the enterprise to find the cause and solve it.

06/14/2020

Working principle of inverter compressor

     The principle of inverter compressor inverter controller is to convert the alternating current in the power grid into a square wave pulse output. By adjusting the frequency of the square wave pulse (that is, adjusting the duty cycle), the speed of thﰸ2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦隆
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ
00븹먱댁珵理뛐珵Љ
䕄ྦ