Copeland Compressor ZPT108K3E-TFC-275

11/20/2022

What are the Differences between Axial and Centrifugal Fans?

Axial fans and centrifugal fans are two different products in the fan category. Their main function is to ventilate the air in the environment.

08/17/2020

What is the reason for the excessive leakage of the refrigeration compressor

1. Insufficient oil flow, increase the oil supply appropriately; 　　2, the assembly sequence of the refrigeration compressor stuffing box is unreasonable and should be assembled according to the procedure;

09/09/2020

Nine misunderstandings in the selection and use of air compressor lubricants

Good lubrication will give full play to the overall efficiency of the air compressor unit in operation, improve equipment efficiency, ensure production quality, and reduce maintenance costs and downtime, which is of inestimable significance.

03/10/2023

Introduction to Three Sorts of Soft Starters

Soft starter, in essence, is a reduced-voltage starter that can control automatically. As it can adjust output voltage arbitrarily, plays a role in current closed-loop control

08/19/2020

The impact of excessive or small pump flow on the chiller

The chiller may have various types of failures. Why does the water pump fail with too much or too little flow?<br></br> 　　 In fact, whether the flow of the water pump is too large or too small, it will have a certain impact on the operation of the chiller, so it is not a good thing that the flow is too large or too small.

06/14/2020

Why does the refrigeration compressor frost and the solution!

Why does the refrigeration compressor frost and the solution! 1. The frost on the compressor return air port indicates that the temperature of the compressor return air is too low, so what will cause the compressor return air temperature to be too low? 器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧ӄ識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ

08/08/2020

Analysis of performance factors of screw chiller assembly accessories

Screw chillers are widely used in industrial refrigeration in various industries such as plastics, electroplating, pharmaceuticals, chemicals, non-woven fabrics, shoemaking, and lasers.

08/11/2020

What are the parts of the electrical installation of cold storage engineering installation

The electrical installation of cold storage engineering can include overhead lines, lighting, cables, machine room wiring, workshop or factory area power transformation and distribution.

08/21/2020

Factors affecting heat transfer on the refrigerant side

1.Flow direction and velocity of steam In the condenser, when the refrigerant vapor contacts the low-temperature wall surface, it exotherms and condenses into a liquid film, and flows downward under the action of gravity.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms