Danfoss Compressor MT018JA5GVE

07/14/2020

Does the air conditioner not cool for a long time? Don't be fooled by the blackhearted repairman, teach you a trick!

It's hard to imagine how people used to live without air conditioning. But air conditioners, like all electrical appliances, have a certain life span. With the increase of service life, especially the occurrence of refrigeration problems, its use effect will decrease with the increase of time, especially refrigeration problems.

07/20/2020

Pay attention to these for compressor maintenance safety!

Oxygen blowing system is forbidden: Oxygen is colorless, odorless, non-toxic, non-combustible and non-explosive. However, mixing with other combustible or explosive gases will promote combustion or explosion;

06/14/2020

About refrigeration compressor overload protector, we must understand these things

1. Why does the compressor produce overheat protection? The working principle and classification of the overload protector.

08/21/2020

Is the air-conditioning installation nonsense

Many people think that if the air conditioner is bought, the air conditioner in this home will be able to cool and heat super well, but in fact, the installation of air conditioner also has a crucial

06/05/2023

13 Reasons Why LG Refrigerator Not Cooling and Solutions (The Latest Version)

With the improvement of living standards, refrigerators have become an indispensable part of family life.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

08/08/2020

How to deal with the noise of air-cooled heat pump unit

The scroll-type air-cooled heat pump unit adopts a noise control plan with a sound insulation cover installed to control its noise. The specific plan is as follows:

07/23/2020

Analysis of Overheating Failure of Refrigeration Compressor

The main reasons for the overheating of exhaust temperature are as follows: high return air temperature, large heating capacity of the motor, high compression ratio, high condensation pressure, and improper refrigerant selection.<br></br> <br></br>

03/03/2021

Control mode of servo motor

Torque control: the torque control mode is to set the external output torque of the motor shaft through the input of external analog quantity or the assignment of direct address. For example, if 10V corresponds to 5nm, when the external analog quantity is set to 5V, the output of the motor shaft is 2.5nm: if the load of the motor shaft is lower than 2.5nm, the motor will rotate forward, and when the external load is equal to 2.5nm

08/05/2020

How to adjust the hydraulic balance of air conditioning system

How to adjust the hydraulic balance of air conditioning system