Danfoss Compressor MTZ40JH1OVE

09/20/2020

Rolling bearing technology

Rolling bearing technology Rolling bearing temperature 　<br></br>　 The main factors of bearing operating temperature:

05/07/2022

Working Principle of 5 Kinds of Solenoid Valves?

When the power is on, the electromagnetic coil generates electromagnetic force to lift the closing part from the valve seat and open the valve

07/30/2020

Common faults and solutions of summer chillers

Entering the hot summer, industrial chillers in many factories ushered in the peak period of refrigeration. The refrigeration equipment frequently runs, and it is very likely that there will be such and other small failures.

07/20/2020

Pay attention to these for compressor maintenance safety!

Oxygen blowing system is forbidden: Oxygen is colorless, odorless, non-toxic, non-combustible and non-explosive. However, mixing with other combustible or explosive gases will promote combustion or explosion;

06/10/2022

Use of Safety Light Curtain

The electric sensitive protection equipment can play the role of protection tripping or induction, and its composition at least includes

06/29/2020

Several causes of compressor burning

08/20/2020

High and low temperature test chamber refrigeration failure What unique secrets do you need to master

The high and low temperature box does not refrigerate, which means that there is a problem with the compressor. A complete refrigeration system is composed of a compressor, a condenser, a throttling device and some auxiliary equipment.

09/10/2020

Analysis on the New Trend of Chinese Inverter Compressor Technology Development

In 1978, Japanese air-conditioning companies put forward the concept of inverter air conditioners. Because inverter air conditioners have many advantages, they soon entered the families of developed countries.

03/02/2021

Related technical terms

1.Positioning or residual torque: when there is no current passing through the winding, the torque required to make the output shaft of the motor rotate. 2.Driver: an electrical control device used to run the stepping motor. This includes power supply, logic programmer, switching element and a variable frequency pulse source which determines the step rate. 3.Dynamic torque: the torque produced by the motor at a certain step rate. The dynamic torque can be expressed by PULL IN torque or PULL OUT torque.

08/19/2020

5 common causes of refrigeration system failures and solutions

1. The suction temperature is too high-mainly caused by the increase of suction superheat. Note that high suction temperature does not mean high suction pressure, because the suction is superheated steam.