Danfoss Compressor SH210A3ACT

09/07/2020

Standard summary of threads in the pneumatic industry

Threads are used to deal with machinery every day, especially hydraulic and pneumatic. For a long time, domestic and foreign, metric and imperial, straight cone, sealed and unsealed, inner and outer, 55 degrees and 60 degrees .

09/20/2022

How Does a Hydraulic Pump Work?

In modern construction machinery, hydraulic working devices are basically inseparable.

08/26/2020

Types of refrigerants and leak detection methods

Refrigerants are also called refrigeration working fluids, commonly known as refrigerants in some areas in the south. It is a working substance that continuously circulates in the refrigeration system and achieves refrigeration through its own state changŸ

09/14/2020

What are the reasons for the high temperature of the air compressor

The air compressor is a transmission machine. If the equipment running at high speed is not properly lubricated or cooled, it will inevitably produce high temperature. Excessive temperature will cause changes in the physical coefficient values ​​of the rotor and bearing materials, and in severe cases, the entire main engine will bite.

07/23/2020

What are the four steps to the safe operation of screw refrigeration compressors?

1 .Preparation:<br></br> 1. Check that the refrigerant, water and electrical equipment system should be normal<br></br>

07/25/2020

The influence of evaporating temperature on refrigeration system

Household air conditioners generally cannot adjust the evaporation temperature! The cold storage and other devices can be adjusted in small amounts, and the increase in the evaporation temperature is mainly in the design and manufacturing stage!

08/05/2020

Does the fresh air system need to be turned on for 24 hours

The fresh air system is an indoor ventilation product that can continuously discharge indoor dirty air 24 hours a day, introduce fresh outdoor air at the same time, and effectively control the air volume and increase energy recovery.

06/29/2020

What is the cause of compressor pipeline vibration

09/07/2020

Precautions for installation of mold core dryer

The mold core dryer adopts the latest mold core adsorption drying technology. It is an air compressor post-processing equipment. What matters should the enterprise pay attention to when installing the mold core dryer?

09/05/2020

What are the advantages of air compressor waste heat recovery What is the effect of air compressor waste heat recovery

During the operation of the air compressor, about 80% of the input electric energy will become heat, and the remaining 20% ​​will eventually become compressed air energy. After the electric energy consumed by the compressor is converted into heat during the working process,