Okmarts Mitsubishi Compressor RB247YFY Mitsubishi Compressor RB247YFY, okmarts Online Average rating: 4.6, based on 89 reviews

Mitsubishi Compressor RB247GHAC

Mitsubishi Compressor RE135VHAMC

Mitsubishi Compressor RB247YFY

100% of 100
380-415/400-440V 50/60HZ 3PH
Availability: In stock
* Shipping calculated at checkout.

Packing and shipping

Packaging Regulation :

Wooden box

Delivery time :

7~14 days(About)

Conditions :

New and Genuine

Shipping cost is not included

Delivery Time: 14-18 Days

Product Display

Mitsubishi Compressor RB247YFY, okmarts online

Product Description




 Power supply:


 Product Description:











 0,10~0,69 MPa


 Brand new

 Piping vibration:

 Max. 0,8 mm


 Rotary Compressors



 Application range:

 Refrigeration parts




 Stainless steel



Scope of application


refrigeration equipment, etc.

Product Media

Mitsubishi Compressor RB247YFY, okmarts online

Installation Process

refrigeration compressors in stock, Packing & Shipping, okmarts online

1. Check whether the refrigerating oil of the original compressor is too dirty. If the oil is too dirty, the system must be cleaned with nitrogen and the dry filter must be replaced.

2. Check whether the contacts of the compressor operation control AC contactor are stuck or have poor contact, causing the compressor to run out of phase. If the compressor is damaged in the coil winding, the AC contactor of the same model must be replaced.

3. Check and protect the circuit. The high and low pressure switch is in the closed state in the normal refrigerant compression state, the high pressure limit is less than or equal to 2.2Mpa, and the low pressure is more than or equal to 0.28Mpa.

4. Check whether the radiator is too dirty and must be cleaned.

5. Check whether the original equipment has refrigerant pressure, and repair it if the refrigerant is leaking.

refrigeration compressors in stock, Packing & Shipping, okmarts online

1. Disconnect the power supply.

2. Disassemble the compressor and check its old compressor.

3. Nitrogen cleaning system, steps, disassemble the filter and blow in nitrogen from the inlet of the radiator, discharge from the outlet of the radiator, then blow in from the inlet of the filter, release from the return pipe of the compressor, and repeat cleaning several times.

4. Install the new compressor and weld the new filter.

5. Use nitrogen to pressure, 2.0Mpa pressure for leak detection for 30 minutes.

6. Circuit check and replace damaged parts, check power supply and control circuit.

7. Clean the radiator.

8. Vent the nitrogen and evacuate for 30 minutes.

9. Add the same type of refrigerant

10. Power-on debugging, check the compressor current and voltage, the normal pressure of the refrigerant, high pressure 1.7Mpa, low pressure 0.45Mpa, the refrigerant charge is expected to be 0.7kg/hp (10-30hp).

Packing & Shipping

refrigeration compressors in stock, Packing & Shipping, okmarts online

Q: What means of transportation?

A: It can be shipped by air to the nearest international airport or by courier like DHL, TNT to your address; if it's not urgently required, they can also be shipped by sea to the nearest sea port.

Q: How long is your delivery time?

A: Usually, if it is in stock, it will take 5 to 10 days. Or, if there is no stock, it is 15-20 days, depending on the quantity.

Mitsubishi Compressor logo, okmarts online

Mitsubishi Electric has always been committed to the research and development of advanced technology and professional knowledge, integrating nearly a hundred patents and proprietary technologies, and continuously introducing high-performance, high-tech, and high-energy-saving air-conditioning products. Facing the huge domestic and commercial air-conditioning market, Mitsubishi Electric will actively and comprehensively meet the needs of users with its unique refrigeration and control technology.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account