Danfoss Compressor SH282A7AAM

08/18/2020

Solutions to HVAC water cycle failures

What are the common problems that occur during HVAC operation? What are the solutions? Come and find out with the editor of okmarts.com!<br></br> 　　 1. Pay attention to pipeline quality.<br></br>

08/25/2020

Cold pipe refrigeration system only half the power of the air conditioner

On August 19, according to foreign media reports, a new study from the Proceedings of the National Academy of Sciences demonstrated a new energy-saving refrigeration system that only needs half the electricity of the air conditioner.

08/17/2020

Principle analysis and characteristics of new technology machines for central air conditioning

1. Water magnetization treatment technology 　　Using the magnetic field effect to treat water is called magnetization treatment of water.

08/15/2020

Eight management regulations for condenser operation

1) When the condenser is in use, its pressure does not exceed the specified range. If it exceeds the specified range, then it is easy to cause problems.

06/29/2020

How the compressor works

06/14/2020

This is the reason for the overheating of refrigeration compressor exhaust~!

This is the reason for the overheating of refrigeration compressor exhaust~! The main reasons for the exhaust temperature overheating are as follows: high return air temperature, large motor heating capacity, high compression ratio, high condensation pre器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁

09/09/2020

Selection criteria and skills of oil filters

The quality of hydraulic oil has a great influence on the working performance of the hydraulic system. Many faults are rooted in it. To prevent oil contamination, install a hydraulic oil filter in an appropriate place to trap the contaminants in the oil and keep the oil clean. , To ensure the normal operation of the oil system.

12/04/2023

Notebook Cooling: Function Analysis of Thermal Grease, Heat Pipe and Cooling Fins

In the cooling module of the notebook, the three most critical elements are the heat pipe, the cooling fan and the cooling fins, and there are also elements used to improve the contact area and heat transfer efficiency between them.

09/08/2020

The difference between air-cooled and water-cooled screw air compressors

The difference between air-cooled screw machine and water-cooled screw machine: 　　The oil cooler of the air-cooled screw compressor and the compressed air after-cooler are made into one body. It is an aluminum plate-fin structure and brazed in a vacuum furnace. Once the oil leaks, it is almost irreparable and only replaced. The working principle is that hot oil and high temperature (about 80℃) gas flow in their respective pipes,

01/24/2024

Cooling Fans for Inverter Motors: Necessity, Intelligent Control and Selection Precautions

Since the inverter motor generates a large amount of heat when running, and poor heat dissipation will cause the motor temperature to be too high, thereby reducing the life and efficiency of the motor.