Danfoss Compressor SH300A9ALM

09/08/2020

Uses of compressed air in various industries

As the second largest power source after electricity, compressed air has a wide range of applications. Compressed air is widely used in industries such as electricity, spraying, food, metallurgy, petrochemical, automobiles, shipbuilding, precision electronics, chemicals and printing.

07/22/2020

The fluorine refrigeration compressor is short of oil, how to add it?

When the compressor is running for a period of time, we can judge whether the compressor is short of oil by observing the oil glass. If the oil level in the oil glass is lower than half of the position, then we need to replenish the oil. This article introduces the oil replenishment method of small and medium-sized compressors.

08/06/2020

Application and troubleshooting of fan coil and electric valve

As a terminal device of the central air conditioning system, the fan coil unit is widely used in residences, offices, hotels, hospitals and other places because of its compact structure, flexible layout, and easy independent control.

09/22/2020

Characteristics and trends of assembled centrifugal compressors

I. Introduction 　　 Assembled centrifugal compressor is also called assembling integral gear speed-increasing centrifugal compressor, and it has developed rapidly in the world in recent years.

08/11/2020

The main reason for the loss of sealing effect of plate heat exchanger rubber gasket

Plate heat exchanger is a very efficient heat exchange equipment, and its application is very wide. The core components of plate heat exchanger are plate heat exchanger plates and sealing rubber gaskets.

08/11/2020

Refrigerant classification and selection requirements

Refrigerants are also called refrigeration working fluids, commonly known as refrigerants in some areas in the south. It is a working substance that continuously circulates in the refrigeration system and realizes refrigeration through its own state changes.

08/17/2020

Causes and treatment of cracks at the inlet of the cooler

The crack at the inlet and outlet of the cooler is a kind of brittle crack, which is generally manifested as a crack at the tip of the toothed plate, and then cracks along the intergranular.

12/22/2021

How to Calibrate a Pressure Transmitter Before Use

Pressure transmitter is a kind of commonly used measuring instrument, which can convert the physical parameters such as gas and liquid sensed by load cell into standard signal output.

06/29/2020

What is the cause of compressor pipeline vibration

06/14/2020

What are the causes of frost in refrigeration compressors

1. The opening of the thermal expansion valve is too large, or the installation of the temperature sensor is incorrect and the fixing is not firm or loose. The main reason is that the temperature sensor may feel the temperature too high in this case, resu器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž