Danfoss Compressor SH560A4AAC

06/23/2020

How to add air conditioning refrigerant

Turn off the power supply of the air conditioner first; if all the light leaks, then you must evacuate before adding it; find the thick tube under the outdoor unit and add fluorine from here; you need to install the pressure gauge when adding fluorine Generally, it can be stopped at about 5 pressures; the temperature needs to be turned to the lowest when turning on the machine, and observe for about half an hour.

11/22/2024

Common Error Codes for Mitsubishi Heavy Industries Central ACs and How to Deal with E43 Code

Mitsubishi Heavy Industries Central Air Conditioner Fault Codes are a diagnostic tool that can help you determine what is wrong with your air conditioner. When your air conditioner malfunctions, a code will appear on the control panel. Here are some common Mitsubishi Heavy Industries central air conditioner fault codes.

09/22/2020

Application of compressed air filter drier in mold manufacturing

Application of compressed air filter drier in mold manufacturing Conditions for manufacturing molds 1. Environmental conditions Temperature: During the whole process of manufacturing male and female molds, the same ambient temperature should always be maintained, that is, 21~28℃.

08/19/2020

The impact of excessive or small pump flow on the chiller

The chiller may have various types of failures. Why does the water pump fail with too much or too little flow?<br></br> 　　 In fact, whether the flow of the water pump is too large or too small, it will have a certain impact on the operation of the chiller, so it is not a good thing that the flow is too large or too small.

08/24/2020

How to use refrigerant to empty the air conditioner after installation

Air, the moisture and impurities contained in the air in the air conditioner system will cause increased pressure, increased current, increased noise, increased power consumption, etc.,

07/28/2020

Analysis of common failure causes of hermetic refrigeration compressors

. How to identify the 3 terminals on the casing of a hermetic compressor?<br></br> The resistance between running terminal (R), starting terminal (S), common terminal (C), RS is greater than the resistance between SC and RC. The resistance between RS is equal to the resistance between SC and the resistance between RC.

04/16/2024

Servo Motor Overheating: Causes and Solutions

Servo motors are used in many industries in our lives. Some common problems and solutions about servo motors are also of great concern to everyone.

06/29/2020

What is the cause of compressor pipeline vibration

06/14/2020

Don't be afraid if the refrigeration system is clogged. Here are retrieval and cleaning methods

Don't be afraid if the refrigeration system is clogged. Here are retrieval and cleaning methods Typical features of clogging 1. The refrigerator or air conditioner does not cool for a long time. 2. The suction pressure drops, and even a vacuum statﰸ2䀀
ￜ皥
䖒皦

08/17/2020

How to recover refrigerant

1. How to recover the refrigerant from the industrial chiller to the accumulator? 　　The specific operation steps for recovering the refrigerant from the industrial chiller to the accumulator are: