Danfoss Compressor SM100W4XM

06/14/2020

Refrigerating oil replacement and internal cleaning

Refrigerating oil replacement and internal cleaning The operation of draining oil is as described above. After the freezing oil is removed and the pressure inside and outside the compressor is balanced, use an allen wrench to loosen the flange bolts and 器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧٢識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

08/09/2020

DORIN compressor

DORIN Compressor Co., Ltd. of Italy was established in 1918. It is one of the founding organizations of ASERCOM in Europe and one of the few top refrigeration compressor manufacturers in the world.

06/29/2020

Analysis of the cause of excessive suction temperature of compressor

Analysis of the cause of excessive suction temperature of compressor The high suction temperature is mainly due to the increase of superheat of suction. Note that high suction temperature does not mean high suction pressure, because the suction is superheated steam. Under normal circumstances, the compressor cylinder head should be half cold and half hot. If the suction temperature is too high, the cylinder head will all heat up.

08/09/2020

Causes and solutions of leakage in heating construction

In the heating construction process, leakage is a relatively common quality problem. Once leakage occurs, it will have a greater impact on people's normal production and life, and at the same time,

09/08/2020

Relevant introduction of membrane compressed air dryer

The membrane dryer is a compressed air drying device that uses the difference in membrane permeability of compressed air to realize the separation of moisture from air and water, thereby obtaining dry compressed air to meet user requirements.

07/01/2020

Talking about the advantages of compressor enthalpy increasing technology

Talking about the advantages of compressor enthalpy increasing technology The air-jet enthalpy-increasing compressor adopts two-stage throttling intermediate air-jet technology, and uses a flash evaporator to separate gas and liquid to achieve an enthalpy-increasing effect. This compressor jet enthalpy increasing technology has many advantages, as follows:

08/16/2020

Precautions for use and installation of industrial chillers and refrigerators

1. Installation method 　　 (1) The industrial chiller should be installed directly on the horizontal surface, please do not install it upside down, diagonally or vertically.

08/14/2020

Introduction to the three most common classification methods of refrigeration compressors

The evaporation temperature of the single-stage refrigeration compressor is in the range of -45~10℃. Divided by evaporation temperature:

08/20/2020

Central air conditioning cooling water system layout method

It is most suitable to choose central air-conditioning as refrigeration equipment in large spaces such as hotels and hospitals. However, the installation of central air conditioners is far more complicated than platform air conditioners.