Danfoss Compressor SM148W6XT

06/29/2020

What is the cause of compressor pipeline vibration

09/25/2024

The most common problems and solutions of adsorption dryers!

Adsorption dryer is a very important part of the compressed air purification process. Whether it operates normally and whether it is running well is directly related to the quality of compressed air.

08/17/2020

What is a plate heat exchanger What are its advantages and scope of application

The plate heat exchanger is stamped into a veneer with corrugated grooves of a certain regular shape from a thin metal plate (usually steel or stainless steel), and then the single pieces are assembled into the required multi-piece group.

08/18/2020

Failure analysis and solutions of various configuration components of refrigeration unit

Reasonably match the refrigeration capacity and refrigeration load of the refrigerator. Adjust the number of operating refrigeration compressors appropriately according to the size of the refrigeration load.

06/14/2020

Do summer air-conditioning rooms need air purifiers

Do summer air-conditioning rooms need air purifiers It is high temperature in summer again. Many people have disputes about whether an air purifier is needed in summer.

07/20/2020

Causes and solutions of air conditioning not heating

The air conditioner has the functions of cooling and heating. Heating in winter and cooling in summer. Life is called a comfortable one. However, why is the air conditioner not heating? In the cold winter, the air conditioner is turned on for heating, but the cold wind blows out, which makes people tremble more.

09/11/2020

Bearing and shaft fit tolerance standard

Bearing and shaft fit tolerance standard ①When the bearing inner diameter tolerance zone and the shaft tolerance zone form a fit, the tolerance code originally belonging to the transition fit in the general basic hole system will become an over-win fit, such as k5, k6, m5, m6, n6, etc., but the over-win amount is not Large; when the bearing inner diameter tolerance is matched with h5, h6, g5, g6, etc., it is not a clearance but an over-win fit.

06/29/2020

What are the causes treatment and prevention methods of compressor liquid blow

What are the causes, treatment and prevention methods of compressor liquid blow Liquid blow means that the refrigerant liquid or wet steam is sucked into the compressor by the compressor due to failure or insufficient absorption of heat, which is called liquid blow. First, the main reasons are as follows:

08/18/2020

How to wire the cold storage distribution box What problems should be paid attention to when wiring

Cold storage power distribution boxes play a very important role in the use of cold storage, and many people do not know much about cold storage power distribution boxes. Let's take a look at it with okmarts.com editor.

08/16/2020

How to use a water-cooled chiller with a cooling tower for the best effect

A cooling tower is a device that cools water. It is often used in the process of high-speed operation of water-cooled chillers. The cooling tower is a fully functional heat dissipation device to ensure the efficient and stable operation of the water-cooled chiller.