Stroke: 10 mm - 3000 mm
Piston diameter: 63 mm
Type code: DGPL: DGPIL: DGPI: DGP
Cushioning: Pneumatic shock absorber, hard characteristic curve: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Guide: Recirculating ball bearing guide: Sliding guide: Basic guide
Driver principle: Positive locking (slot)
Position sensing: With integrated linear potentiometer: With linear potentiometer attached: For proximity sensor
Variants: Standard slide: Supply port at both ends: Extended slide
Operating pressure: 1.5 bar - 8 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb X
Explosive ambient temperature: -10Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 2 (ATEX): Zone 1 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:-:-]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress: 1 - Low corrosion stress: 0 - No corrosion stress
Degree of protection: IP65
Ambient temperature: -10 to 60 Celsius Degree
Cushioning length: 30 mm
Theoretical force at 6 bar, retracting: 1870 N
Theoretical force at 6 bar, advancing: 1870 N
Alternative connections: See product drawing
Pneumatic connection: G3/8
Note on materials: Free of copper and PTFE
Cover material: Cast aluminum: Coated
Seals material: TPE-U(PU): NBR
Housing material: Anodized: Aluminum