Maritime classification: See certificate
Stroke: 1 mm - 200 mm
Piston diameter: 16 mm
Type code: DSNU
Cushioning: Self-adjusting pneumatic end-position cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Conforms to standard: ISO 6432: CETOP RP 52 P
Design: Cylinder barrel: Piston rod: Piston
Position sensing: For proximity sensor
Variants: Clamping unit on the piston rod: Heat-resistant seals max. 120Celsius Degree: Piston rod with external thread shortened at one end: Axial supply port: Transverse supply port: Extended external thread piston rod: Piston rod at one end: High corrosion protection: With anti-twist protection: With direct mounting: Low friction: Extended piston rod: Through piston rod: Constant, slow movement
Protection against torsion/guide: Square piston rod
Operating pressure: 1 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 22 (ATEX): Zone 21 (ATEX): Zone 2 (ATEX): Zone 1 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Impact energy in the end positions: 0.15 J
Theoretical force at 6 bar, advancing: 104 N - 121 N
Type of mounting: With accessories
Pneumatic connection: M5
Note on materials: RoHS-compliant
Cover material: Wrought aluminum alloy
Seals material: NBR: TPE-U(PU)
Piston rod material: High-alloy stainless steel
Material of cylinder barrel: High-alloy stainless steel