Stroke: 1 mm - 500 mm
Piston diameter: 25 mm
Type code: DSNU
Cushioning: Self-adjusting pneumatic end-position cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Conforms to standard: CETOP RP 52 P: ISO 6432
Design: Piston: Piston rod: Cylinder barrel
Position sensing: For proximity sensor
Variants: Transverse supply port: Piston rod at one end: Heat-resistant seals max. 120Celsius Degree: Piston rod with external thread shortened at one end: With direct mounting: Extended external thread piston rod: Special thread on piston rod: High corrosion protection: Constant, slow movement: With anti-twist protection: Through piston rod: Internal thread on piston rod: Extended piston rod: Clamping unit on the piston rod: Axial supply port: Low friction
Protection against torsion/guide: Square piston rod
Operating pressure: 1 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 2 (ATEX): Zone 1 (ATEX): Zone 22 (ATEX): Zone 21 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Impact energy in the end positions: 0.3 J
Theoretical force at 6 bar, advancing: 247 N - 295 N
Type of mounting: With accessories
Pneumatic connection: G1/8
Note on materials: RoHS-compliant
Cover material: Wrought aluminum alloy
Seals material: NBR: TPE-U(PU)
Piston rod material: High-alloy stainless steel
Material of cylinder barrel: High-alloy stainless steel
Festo Air Cylinder DSNU-25-50-PPV-A-S2
People who bought this item also viewed
CKD Air Cylinder SCPG2-M-00-10-30
Festo Air Cylinder DSNU-16-25-P-A-S2
Festo Air Cylinder EMM-10-15-P-A
Festo Air Cylinder DSNU-40-125-PPV-A
Festo Air Cylinder ADVUL-50-50-P-A
Festo Air Cylinder DGSL-25-20-P1A
CKD Air Cylinder STSB-2525
KOGANEI Air Cylinder CDAS16X20-R
AirTAC Air Cylinder ACQ20X30
HENGSTLER Encoder RI58-O/4096AK.72TB
AZBIL Actuator ECM3000F2110
SMC Proportional Valve ITV2050-01N2N4
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Lenze Servo Drive SMC2-P330-00459
Daikin Air Conditioner FMQ30PG20
COSEL Power Supply NAH-20-471-D
Recent related posts
-
08/07/2020
Common physical and chemical methods for removing scale in condensers in chillers
The water chiller is prone to scale formation in the condenser pipe after long-term use. If it is not treated in time, these scales will affect the heat exchange effect and cause the condensing temperature of the unit to increase
-
07/20/2023
What is a Water Source Heat Pump (with Water Source Heat Pump Diagram)
A water source heat pump (WSHP) is an HVAC system that uses the natural heat in water to provide heating, cooling, and hot water for commercial and residential buildings.
-
07/06/2022
Proportional Valve Types for Different Applications
When it comes to Proportional Valves, they are well-suited to a number of different applications in machinery, basic processes and hydro-pneumatic systems.
-
09/02/2020
The installation standards and requirements of the air compressor are indeed in place in detail!
1 Installation environment layout requirements In order to meet the needs of development, the computer room should have room for expansion in the position of the general map.
-
09/04/2020
Do you know the classification of commonly used filters
The impurities contained in the compressed air of the pneumatic system are divided into four categories: solid dust, moisture, oil mist and odor. In order to meet the requirements of different industrial sectors on the quality of compressed air,
-
07/31/2020
Fresh air treatment and energy-saving methods of multi-line system
In the process of using air conditioners, we must consider the related functions of air conditioners on the one hand, and on the other hand, consider its energy-saving effects and reduce power consumption. The multi-line system can meet people’s needs in life while reducing input costs. Reduce energy consumption.
-
08/11/2020
Radiator heating system riser pipe installation and precautions
1. Standpipe installation of radiator heating system:<br></br> 1. When arranging the system riser, it should be matched with the use requirements of the building, the heating system diagram, the layout of the radiator, etc.. It is necessary to save pipes and facilitate installation and maintenance.
-
07/03/2020
Global HVAC Centrifugal Compressors Market 2020-2025 Report and Imapct of Coronavirus Pandemic
The “Portable Air Compressor” Market report considers the central point responsible for driving the development of the Snowblowers Industry, notwithstanding the key preventions and difficulties.
-
08/20/2020
Don't blindly repair the refrigeration compressor if it fails to contact the manufacturer is the best policy
The environmental temperature and humidity test box is mainly used for product temperature, humidity alternating and high and low temperature rapid alternating cycle tests, and its purpose is to detect the reliability of products under high and low temperature impact tests.
-
08/22/2022
Speed-Torque Curve of Stepper Motors and FAQs
This is the torque the motor will produce when the motor is stationary and rated current is applied to the windings.