Fuji Servo Motor GYC751D5-HC2-B

07/31/2020

What kind of equipment is suitable for high and low pressure refrigerant charging method

There are generally two types of refrigerant charging methods: low-pressure charging and high-pressure charging. The advantage of the low pressure charging method is that it is easier to control the amount of refrigerant charged,

08/05/2020

Simple estimation and measurement of indoor and outdoor wind pressure difference in fresh air system

At present, most of the fresh air systems we use follow the design philosophy of large air volume and slight positive pressure, but many people are also confused about this. How to detect the pressure in the room on site?

08/19/2020

What are the tips for purchasing a screw chiller for the first time

Screw chiller is named screw chiller because of its key component-the compressor adopts screw type. The state of the unit from the evaporator is gas refrigerant; after adiabatic compression by the compressor, it becomes a high temperature and high pressure state.

09/09/2020

Installation method to ensure that the air compressor does not leak oil

1. Install the gasket correctly: The gasket between the parts of the air compressor functions as a leak-proof seal. If the material, production quality and installation do not meet the technical specifications, it may cause oil leakage.

05/14/2022

What Are The Input And Output Module (I / O) of PLC?

PLC I/O is the part of the PLC that connects the brain of the PLC, the CPU, to the outside world, the machines.

08/24/2020

In the future, rotary compressors will usher in good opportunities in these fields

Traditionally, rotary compressors are almost exclusively dedicated to household air conditioners, but in recent years, benefiting from economic development and technological upgrades, application scenarios are being further subdivided and diversified.

06/22/2020

Working principle of steam compressor_steam compressor application

Working principle of steam compressor_steam compressor application Working principle of steam compressor After the steam is filtered by the filter, clean steam then enters the host cavity through the intake valve, and the volume of the cavity changes from large to small to compress the steam. The volume of the cavity is changed by the rotor rotating under the drive of the motor. <img src="{{media url=&quot;Working_principle_of_steam_compressor_steam_compressor_application.jpg&quot;}}" alt="" />

06/23/2020

What refrigerator is used for cooling

Most of them use fluorine-free refrigerants, and the models include R600A, R410A, R407A, R134A, etc., which are all green and environmentally friendly. The specific models are marked on the nameplate on the rear side of the refrigerator. the way.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

09/07/2020

Ten points to judge the pros and cons of inverter products!

The technical grade of the frequency converter is gradually developed and formed. With the improvement of use requirements and the development of technology, the quality of the device, the expansion of functions, and the progress of automation technology, it will gradually advance.