FUJITSU Relay FTR-B4SA4.5Z

05/31/2024

Solenoid Valve Types: the Most Complete Guide

The solenoid valve is one of the common valves in industrial control systems. It can control the opening and closing of the valve through electromagnetic force, thereby achieving control of the gas and liquid lines.

09/09/2020

How to provide air source for air compressor

　Is the air compressor better for centralized air supply or more energy-saving for point-by-point air supply; for equipment with small air consumption and low pressure, it may be economical to install a pressure reducing valve to work.

09/06/2020

Low-pressure conveying oil-free screw air compressor

Application of low pressure conveying oil-free screw air compressor: Pneumatic conveying power: the power source for pneumatic conveying of powdered or granular materials such as flour, sugar, salt, grain, chemical particles, cement, coal powder, mineral powder, etc.

09/07/2020

Year-end overhaul of compressor equipment in tire service industry

Partial maintenance of oil-water separator 　　The main function of the oil-water separator is to adjust the system pressure and ensure system lubrication. Insufficient system pressure will cause the tire changer to work weakly, and lubrication failure will cause damage to the tire changer cylinder or wasted oil injection.

06/29/2020

Compression ratio of American Copeland compressor

08/14/2020

The refrigeration device is prone to failure and the reason

Among the failures of refrigeration equipment, failures caused by "leakage" and "blocking" are the most common.

09/10/2020

Application of pressure sensor in air compressor safety management system

In the safety management system, the pressure sensor realizes the side airbag control. Air compressor safety management system is also a field where sensors are widely used. There are two solutions for controlling the side airbag of the air compressor:

03/10/2021

Servo driver related parameter setting method

Position feedforward gain: set the feedforward gain of the positioning loop. The larger the set value is, the smaller the position delay isand the larger the feedforward gain of the position loop is, the high-speed response of the control system will rise, but the position of the system is unstable and prone to oscillation. When high response characteristics are not required, this parameter is usually set to 0, indicating the range of 0 ~ 100%.

02/10/2022

7 Reasons Why an Air Compressor is Overheating

As hot summer is coming, air compressor maintenance workers will also usher in the busiest season of the year.

07/30/2020

11 common problems with refrigeration compressors, do you know these?

Impurities entering the friction surface of the moving parts of the compressor pump body will cause abnormal scratches and wear. Impurities entering the solenoid valve, expansion valve, control valve, capillary tube and stop valve in the refrigerator system will block the valve hole or make the valve close tightly. And fail.