GATES Belt 7 / 8V2000

06/21/2020

The classification of piston compressor_The advantages and disadvantages of piston compressor Classification of piston compressor

The classification of piston compressor_The advantages and disadvantages of piston compressor <img src="{{media url=&quot;The_classification_of_piston_compressor.jpg&quot;}}" alt="" />Classification of piston compressor 　　 (1) Classification according to the position of the cylinder centerline   Vertical compressor: The center line of the cylinder is perpendicular to the ground. Horizontal compressor: The center line of the cylinder is parallel to the ground, and the cylinder is only arranged on one side of the fuselage.

06/22/2020

Working principle of steam compressor_steam compressor application

Working principle of steam compressor_steam compressor application Working principle of steam compressor After the steam is filtered by the filter, clean steam then enters the host cavity through the intake valve, and the volume of the cavity changes from large to small to compress the steam. The volume of the cavity is changed by the rotor rotating under the drive of the motor. <img src="{{media url=&quot;Working_principle_of_steam_compressor_steam_compressor_application.jpg&quot;}}" alt="" />

09/09/2020

The influence of machining on fatigue life

The residual compressive stress introduced by shot blasting/shot peening is a percentage of the final tensile stress strength, and this ratio increases as the strength/hardness of the part material itself increases. High-strength/hardness metals are more brittle and more sensitive to surface defects. Shot blasting/shot peening will allow these high-strength metals to be used in fatigue-prone working conditions. Aircraft landing gear is usually designed with a fatigue strength of 300 ksi (2068 MPa), combined with shot blasting/shot peening.

06/14/2020

Data Center Refrigeration System 41 Questions and Answers

How to repair the air conditioner compressor failure In summer, air conditioning is used more often, and the cooling effect of the air conditioner depends on the compressor, so once the cooling effect disappears, it means that the compressor has failed. 器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

06/14/2020

refrigeration compressorIndustry prospects

The type, application, geographic location and end-user industry of refrigeration compressor products are the main market areas in this study.

08/21/2020

The principle and decisive factors of cooling tower cooling effect

The role of the cooling tower is to exchange the cooling water carrying waste heat with the air inside the tower body, so that the waste heat is transferred to the air and dispersed into the atmosphere.

08/18/2020

Solution to the non-circulation of cold water in the chiller

Generally, the chiller (small) produced by our okmarts.com already contains a chilled water circulating pump, and the chiller (large) does not contain a chilled water circulating pump.

09/14/2020

What are the reasons for the high temperature of the air compressor

The air compressor is a transmission machine. If the equipment running at high speed is not properly lubricated or cooled, it will inevitably produce high temperature. Excessive temperature will cause changes in the physical coefficient values ​​of the rotor and bearing materials, and in severe cases, the entire main engine will bite.

09/03/2020

To the air compressor salesperson: how to make an air compressor to sell more and more

Hard work does not necessarily lead to a good sales performance. Why are the air compressor sales people tired and tired every day, but they sell fewer and fewer machines? If the method is wrong, there will be many detours