Hitachi Compressor BSA418CN-R1AN

08/11/2020

Why does your refrigeration unit consume so much power

1. Operation management of refrigeration equipment<br></br> The amount of cold produced by refrigeration equipment is directly related to the operating conditions of the system. For the same compressor with the same structure, speed, and type of refrigerant, due to changes in operating conditions and different operation management,

07/18/2025

How to Choose Pulse, Analog and Communication Control Modes of Servo Motor

There are three control modes of servo motor: pulse, analog and communication. In different application scenarios, how should we choose the control mode of the servo motor

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

06/30/2020

Lubrication method for air conditioner compressor fault maintenance

Lubrication method for air conditioner compressor fault maintenance The specific conditions of the lubrication method for air conditioner compressor fault maintenance are as follows:

09/08/2020

Comparison of direct drive and belt drive of air compressor

The two transmission modes of air compressors are direct gear transmission and transmission through a certain medium, namely belt transmission, generally speaking, direct drive and belt transmission.

09/03/2020

The advantages of the third eye of the air compressor are countless Take a look at remote monitoring.

As technology continues to improve and become more intelligent, manufacturing equipment can better monitor equipment performance and track regular maintenance through remote monitoring.

09/14/2020

What is an air compressor

The machine used to generate compressed air is also called compressed air machine, also called air compressor, or air compressor for short. The motor directly drives the compressor to make the crankshaft produce rotational movement, drive the connecting rod to make the piston produce reciprocating motion, and cause the cylinder volume Variety.

09/21/2020

10 steps to choose an air compressor

When building an air system, in addition to the purchase cost, how to save high-frequency electricity expenses? How to extend the life of the air machine? How to stabilize the air supply pressure? And how to reduce environmental noise and pollution? It is a problem that users expect to solve: how to correctly select an air compressor in the initial stage of setup plays a key factor.

08/07/2020

Knowledge points of HVAC cold and heat source design

1.The design position of the pump in the system: Generally speaking, the chilled water pump should be located at the front end of the chiller, and the chilled water coming back from the end is pumped back to the chiller through the chilled water pump;

09/14/2020

Intake valve cannot open fault

Quanzhou failure analysis In Quanzhou in the past two days, I was debugging an air compressor. I encountered such a problem. The unit was operating normally for the first time. However, after shutting down and turning on, the unit was abnormal and could not pump air. At present, it can be guaranteed that the original electrical appliances are normal.