IFM Sensor IG504A

09/08/2020

What are the functions of the air compressor dewatering device

The compressed air produced by the compressor is not pure. This is because the air compressor itself contains lubricating oil. During the compression work, part of the lubricating oil must be mixed into the compressed air.

08/11/2020

Instructions for the use of ultra-low temperature storage boxes and daily care methods

Instructions for the use of ultra-low temperature storage boxes and daily care methods<br></br> 1. Transportation and storage matters<br></br> 1. When unloading from the truck, use a double forklift and pay full attention to safety.

08/20/2020

Share How to judge common failures of air conditioners

It’s normal for the air conditioner to have problems after using it for a long time. So, how do you judge where the problem is? How to prevent and avoid these problems?

01/20/2021

On-board oil-free air compressor, after reading these faults, you can solve them by hand

1. Excessive temperature rise 　　Excessive temperature rise is a common fault during the operation of vehicle-mounted air compressors. Vehicle-mounted oil-free air compressors often operate at high temperatures,

06/29/2020

Compression ratio of American Copeland compressor

06/25/2020

Classification of air-conditioning compressors

The air-conditioning compressor plays the role of compressing and driving the refrigerant in the air-conditioning refrigerant circuit. The working circuit is divided into an evaporation area (low pressure area) and a condensation area (high pressure area). The indoor unit and outdoor unit belong to the high-pressure or low-pressure area (depending on the working state), and the compressor is generally installed in the outdoor unit.

06/28/2020

One article to understand what is a piston compressor

One article to understand what is a piston compressor Piston compressor is a compressor that relies on live cold reciprocating motion to pressurize gas and deliver gas. It belongs to positive displacement compressor, also known as "reciprocating piston compressor" or "reciprocating compressor".

04/03/2025

Servo Motor vs. Stepper Motor: Unraveling the Differences and Choosing the Right Fit

In the realm of automation and precision control, the choice between servo motors and stepper motors plays a pivotal role in determining the efficiency and accuracy of various systems.

08/20/2020

Installation and placement conditions of cooling tower of thermal shock tester

Let's learn about the installation and placement conditions of the cooling tower of the thermal shock tester with the editor of okmarts.com! 1. The ground is flat and well ventilated;

08/20/2020

Selection and design of cold storage doors

Under normal circumstances, the cold storage door as one of the cold storage equipment only accounts for less than 10% of the entire system cost. After the entire system is put into use, it has almost become the "front" of the entire system.