Brief description The electronic thermostat measures the temperature via RTD temperature probe, themocouple, or current 0(4) to 20 mA and can be configured as a simple heating or cooling thermostat depending on the set switching behavior. The timer function can be used to start the thermostat function(heating or cooling) or to set a time limit to it. The switching status of the relay and digital outputs as well as the actual and setpoint value are shown simultaneously in the display. It has a resolution of 64*80 pixels, has backgroud lighting, and can be switched to national languages German, English, French, and Spanish. The device is operated via 4 keys on the front panel.The electrical connection a potential-free contact are available as options. A setup program is available is available as an an accessory for simple configuration, parameterization, and reading out of the data logger. Special features: 1. 5 different measuring input groups available 2.Intuitive operation and configuration on the device or with the setup program through USB interface 3.User level with 8 parameters 4.Dot matrix display 64*80 pixels with 4 national languages 5.Data logger function 6.Service and operating hours counter 7.Connection via terminal blocks with push-in technology 8.10 A relay(changeover contact) 9.Customer-specific linearization in the setup program 10.Limit value monitoring function 11.Timer function 12.Connection diagram retrievable in the LCD display