Kuebler Encoder 8.5020.3152.0100

03/02/2021

Connection between Arduino and servo motor

The connection of the servo motor using Arduino is as follows: Connect the black wires on the two servo motors to the GND on the Arduino Connect the red wires on the two servo motors to the 5V pin on the Arduino Connect the yellow wire on the first motor to pin 8 on the Arduino

02/05/2025

The Difference between Hermetic and Semi-Hermetic Compressors

The compressor is the primary equipment in the refrigeration system. It converts electrical energy into mechanical energy, compresses low-temperature and low-pressure refrigerant gas into high-temperature and high-pressure gas, and ensures the cycle of refrigeration.

02/27/2021

Debugging method of servo motor

Before wiring, initialize the parameters. On the control card: select the control method; clear the PID parameters; let the default enable signal turn off when the control card is powered on; save this state to ensure that the control card is in this state when it is powered on again.

07/08/2020

This is the key method to solve the leakage problem of fan coil

The fan coil and fresh air system is a widely used air-conditioning method. Because of its flexible layout and the ability of each room to be adjusted independently, it is commonly used in hotels, hotels, office buildings, hospitals and other buildings. However, many problems are often caused by mistakes in construction and design, and the most common one is water leakage.

06/29/2020

What is the cause of compressor pipeline vibration

07/14/2020

Compressor 9 types of faults and hazard analysis are all here! ! !

Compressor 9 types of faults and hazard analysis are all here! ! ! 1. Common faults of compressor — start with liquid Starting with fluid is a problem that easily occurs when the machine is stopped. During shutdown, the refrigerant will migrate from the system back to the compressor and deposit in the lubricant.

08/05/2020

What are the requirements for the installation of container cold storage

What are the requirements for the installation of the container cold storage? The container cold storage can be assembled in the container, and can be equipped with refrigeration equipment according to the customer's demand for quick freezing.

08/16/2020

What should I do if the screw of the rod-type chiller bites to death

Screw chillers are widely used in industry and chemical industry. Screw chiller is just one type of screw refrigeration series. There are also medium and low temperature screw chillers, air-cooled screw chillers,

09/11/2020

Summary Essentials of water treatment for central air-conditioning chillers

Looking at the management of central air-conditioning throughout the country, it is found that very few are well managed, and all have problems of one kind or another to varying degrees. The main problems are described as follows: 1. Problems caused by the unreasonable design of the design department

06/14/2020

Detailed explanation of screw compressor structure and working principle

Detailed explanation of screw compressor structure and working principle Screw compressors, also known as screw compressors, include screw air compressors and screw process compressors (vinyl chloride compressors, etc.).