NB Nippon Bearing Linear Guideway SV1040-10Z

09/11/2020

Bearing and shaft fit tolerance standard

Bearing and shaft fit tolerance standard ①When the bearing inner diameter tolerance zone and the shaft tolerance zone form a fit, the tolerance code originally belonging to the transition fit in the general basic hole system will become an over-win fit, such as k5, k6, m5, m6, n6, etc., but the over-win amount is not Large; when the bearing inner diameter tolerance is matched with h5, h6, g5, g6, etc., it is not a clearance but an over-win fit.

08/15/2020

The price of industrial chiller is too low, what should you pay attention to

Industrial chillers are commonly used temperature control equipment and are used in various industries. Therefore, the requirements for use are also different. The requirements for laser and

06/29/2020

Compression ratio of American Copeland compressor

11/05/2024

4 Ways to Test AC Compressor

The air conditioning compressor (AC compressor) is a key component in the air-conditioning system, and it is responsible for changing the refrigerant from a low-pressure state to a high-pressure state, thereby realizing the cooling effect of the air conditioner.

07/27/2023

Heat Pump Makes Loud Noise When Turning On: Causes and Solutions

A heat pump is a crucial component of your home's HVAC system, providing both heating and cooling throughout the year. While heat pumps are generally reliable, you may occasionally experience problems with them, such as a heat pump making loud noise when turning on.

08/30/2020

Which position in the machinery industry has a career

The modern development of Payipa machinery technology<br></br> Due to historical reasons, our country has missed the previous industrial revolutions. Mechanical technology has been paid attention to mainly after the founding of the People’s Republic of China.

01/16/2021

What are the requirements for refrigeration compressor installation

What are the requirements for refrigeration compressor installation What are the general requirements for the installation of refrigeration compressors? 1.Collect the original materials and technical documents of the refrigeration device and system desi器2䀀
ￜ皥
䖒皦즠Ʋ㉄ᰙ㲈Ʋ
䌁皦
ᮔDž༬皧㉎ᰙЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B

04/23/2025

Top 10 differences between R410A and R22 refrigerants and the difference between R410A and R22 copper pipes

R22 is the chemical name of difluoromethane, is a member of the Freon family, belongs to the hydrochlorofluorocarbon class.

08/19/2020

Three-step strategy to extend the service life of chillers

After a year of non-stop operation of the chiller, more or less debris will be generated, and it will be attached to the evaporator, condenser, cooling tower water system or filter, and the refrigerant oil will also be contaminated,

06/14/2020

Compressed air technology is becoming more efficient

Compressed air technology is becoming more efficient Compressed air technology is becoming more efficient Compressed air is the most widely used in industry and commerce besides electricity Energy is widely used because it is easy to operate, fast, hig器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧ܲ識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ