Air compressor inverter will overheat The reasons and measures are here

Air compressor inverter will overheat The reasons and measures are here

The high temperature in summer often causes high temperature failure of the air compressor. At the same time, for the air pressure of the frequency conversion control, it is easy to cause the high temperature problem of the air compressor frequency converter. The high temperature problem of the inverter will not only affect its normal performance, but also affect its service life.

　　 If the inverter fails, it will also affect the operation of the entire air compressor system. Ai Gao summarized the common causes and solutions for the overheating of the air compressor inverter.

　　The ambient temperature is too high

　　 If the ambient temperature is too high, the temperature of the internal components of the inverter will be too high. To protect the internal circuit of the inverter, the inverter will alarm and stop.

　　 To reduce the temperature of the use environment, a fan can be installed or the ground can be washed with water.

　　 Poor ventilation

　　 If the air duct of the inverter is blocked or the air duct of the control cabinet is blocked, it will affect the internal heat dissipation of the inverter and cause the inverter to overheat and alarm.

　　 Regularly check and repair the inverter, remove the garbage in the air duct, and smooth the air duct.

　　 The cooling fan is blocked or damaged

　　 When the cooling fan of the inverter does not work normally, a large amount of heat will accumulate in the inverter and cannot be dissipated.

　　 Overhaul the cooling fan of the inverter and replace it if it is damaged.

　　 overloaded

　　 When the load carried by the inverter is too heavy, it will generate excessive current and generate a lot of heat. Sometimes the inverter will overheat and alarm.

　　 Reduce the load or increase the capacity of the inverter.