Energy-saving space of screw air compressor itself

Energy-saving space of screw air compressor itself

When we talk about the energy saving of screw air compressors, we often start from the outside of the air compressor, such as frequency conversion transformation, waste heat recovery, etc. It seems that few people would think of solving it from the air compressor equipment itself. In fact, it is entirely possible to tap the energy saving potential from the air compressor system itself, and the most applicable and easy to master are the following points:

　　 1. Ensure the quality and temperature of intake air. Practice has proved that the higher the air quality around the screw air compressor, the better the exhaust quality and the lower the energy consumption.

　　2. Choose suitable lubricating oil (it is recommended to choose lubricating oil containing defoamer and oxidation stabilizer).

　　3. Pay attention to adjust the set proportional band and integral time, try to avoid sudden reduction of air consumption.

　　4. Discharge the condensed water of screw air compressor, air dryer, air storage tank and pipe network in time.

　　 5. If it is a water-cooled screw air compressor, you must also pay attention to the water quality and temperature of the cooling water, reasonable cooling water discharge volume, planned water replenishment and regular cleaning of the cooling water system.

In addition, good operating habits and scientific and reasonable maintenance cycles are not obvious in terms of energy saving, but they can effectively reduce the failure rate of the screw air compressor system, so it can save maintenance costs, so from an economic point of view In general, it can also be summarized into this range.