Have you considered these four questions when using screw air compressors

Have you considered these four questions when using screw air compressors

When using a screw air compressor, have you considered these four issues: the speed of the screw air compressor, the working temperature of the screw air compressor, the lubrication method of the screw air compressor, and the use environment of the screw air compressor.

　　The specific details are as follows:

　　 consider the screw air compressor speed

　　 Rotation speed is an important parameter of screw air compressor. It is not good if the rotation speed is too high, nor can it be too low.



　　If the speed of the air compressor is too high and the rotor cannot bear it, the service life of the air compressor will be greatly reduced;

　　 The speed is too low, the exhaust volume and exhaust pressure are not up to the working condition requirements, and the "oil running" will be serious.

　　Considering the working temperature of the screw air compressor

　　 Working temperature refers to the ambient temperature where the air compressor is working. If the temperature of the working environment is relatively high, corresponding cooling measures should be taken.

　　 At the same time, use lubricating oil with high viscosity and high flash point; the ambient temperature is low, and there will be no bad effects.

　　 When the air compressor starts at a very low temperature (below 0°C), you need to pay attention to it. Be careful that the lubricating oil is condensed inside.

　　Considering the lubrication method of screw air compressor

　　The lubrication method of screw air compressor can be divided into two types: oil lubrication and oil-free lubrication.

　　 Oil-lubricated screw air compressors are commonly used in the market, which can almost meet all kinds of gas demand through post-processing equipment;

　　 The price of screw compressors without oil lubrication is relatively high, and they are suitable for industries that require high compressed air quality, such as medicine and food.

　　Considering the use environment of screw air compressor

　　 The use environment of the air compressor mainly refers to the site selection and establishment of the air compressor station. The air compressor should be placed in a well-ventilated place and avoid direct sunlight and rain;

　　 is built on hard soil, with a certain distance between the walls and the top; the relative humidity of the air should be low, and there should be less dust and impurities.