How to clean the constant temperature and humidity box condenser

How to clean the constant temperature and humidity box condenser The condenser of the constant temperature and humidity test chamber should be maintained regularly on a monthly basis. Use a vacuum cleaner to absorb the dust adhering to the condensing heat dissipation mesh or use high-pressure air to remove the dust. Wet bulb test cloth replacement of constant humidity and constant humidity test box When the surface of the test cloth is not clean or hard, or after the temperature control is completed, the test cloth must be replaced before the temperature and humidity sphericity control is continued. The test cloth should be replaced every three months. The temperature measurement body should be wiped with a cleaning cloth when replacing , Should be cleaned when replacing the new test cloth. The water storage in the humidifier should be replaced once to ensure that the water quality is clean, and the humidifying water tray should be cleaned once to ensure smooth water flow. The power distribution room must be cleaned once a year. When cleaning, you can use a vacuum to scream to remove the dust. The core components of the constant temperature and humidity testing machine: condensers, copper tubes, evaporators, compressors and other refrigeration systems should pay more attention to regular cleaning, and dust should be removed in time. In particular, the condenser should be maintained regularly on a monthly basis. Use a vacuum cleaner or a brush to remove the dust adhering to the condenser cooling mesh or use high-pressure air to remove the dust. This can prevent the device from overpressure and overload. Check the copper pipes, various functional joints, and welding ports for oil leakage. If there is any external leakage, it must be dealt with immediately.