Operational misunderstandings that industrial chillers are easy to encounter

Operational misunderstandings that industrial chillers are easy to encounter

When using industrial chillers, the operation method is very important. Only the correct operation method can ensure the normal and stable operation of the industrial chiller. If there are many wrong operation behaviors, it will directly affect the normal use of the industrial chiller. In this case, even more failures will occur, which will affect the cooling performance of industrial chillers.

　　 The failure of most industrial chillers is directly related to the daily operation of industrial chillers. Therefore, when using industrial chillers, you need to learn the correct operation methods. If the enterprise can complete the entire operation process of the industrial chiller in accordance with the operating instructions, the service life of the equipment can also be guaranteed even without any maintenance. If the enterprise has many wrong ways to operate the industrial chiller, the operating status of the industrial chiller will inevitably be affected, and even cause various failures of the industrial chiller. The more failures of industrial chillers, the higher the cost of using industrial chillers, which is not conducive to the long-term use of industrial chillers to complete production tasks.

With the widespread use of industrial chillers, more and more companies will use industrial chillers, but the normal use of industrial chillers is often affected by operating errors during operation. The editor of okmarts.com will give you some examples. Operational misunderstandings that are easy to encounter in the usual use of industrial chillers.

　　 Misunderstanding 1: When starting up, the chilled water inlet and outlet pressure drops are adjusted to be higher than the operating parameters. When the pressure drop is too high, the inlet and outlet valves of the evaporator of another non-operating unit are opened. Remove excess water from the evaporator of another unit to reduce pressure drop. This mode of operation is to artificially increase the operating current of the cold water pump and waste power resources.

　　 Misunderstanding 2: The water inlet and outlet valves on the evaporator of the inactive unit are not closed first when starting up, causing a part of the chilled water to flow away from the inactive chiller evaporator, which affects the cooling effect of the chiller under working conditions.

　　 In the face of these wrong operation methods, how to avoid various illegal operations? The editor of okmarts.com suggests that you can make changes in the following ways.

　　In the process of operating industrial chillers, enterprises need to carefully study the specific steps of turning on and off the equipment. According to the actual use environment, use the correct operation method to start the industrial chiller to avoid equipment failure.

　　 Every time you need to use an industrial chiller, you need to operate the industrial chiller according to the steps in the instruction manual. If there is an operation method that is different from the requirements, it needs to be corrected in time, so as not to affect the normal operation of the equipment, and even cause the service life of the industrial chiller to continue to decrease, which is not conducive to the long-term use of the industrial chiller.