Year-end overhaul of compressor equipment in tire service industry
Partial maintenance of oil-water separator
The main function of the oil-water separator is to adjust the system pressure and ensure system lubrication. Insufficient system pressure will cause the tire changer to work weakly, and lubrication failure will cause damage to the tire changer cylinder or wasted oil injection.
Maintenance:
Pressure adjustment: When the air compressor is at full pressure, pull up the yellow adjustment cap and adjust the pressure in the direction indicated by the adjustment cap. The standard pressure is 8bar-10bar.
Lubrication adjustment: Use a flat-blade screwdriver to unscrew the adjustment screw at the upper end of the oil cup, and it is advisable to drop 1-2 drops of oil every three steps.
Note:
1. The oil cup can be filled with SAE30 lubricating oil when the air source is cut off, and the oil volume is 2/3 of the capacity of the oil cup;
2. Always drain the water cup of the oil-water separator;
3. All lubricating oil is prohibited from using waste engine oil.
Year-end overhaul of compressor equipment in tire service industry
Subscribe to relevant news content?
Subscription
Unsubscription
Recent related posts
09/07/2020
Year-end overhaul of compressor equipment in tire service industry
Partial maintenance of oil-water separator The main function of the oil-water separator is to adjust the system pressure and ensure system lubrication. Insufficient system pressure will cause the tire changer to work weakly, and lubrication failure will cause damage to the tire changer cylinder or wasted oil injection.
09/07/2020
Why is air humid after compression
We all know the importance of compressed air drying. This is a critical step in the compressed air process. If you skip this step, it may cause a large amount of water to accumulate in your system. So why does compressed air get wet?
09/07/2020
Why do air compressors need precision filters
Precision filter is one of the most common configurations in air compressor post-processing equipment, so what does it do? Why configure filters? Summarize the following points for your reference:
09/07/2020
Why choose a frequency conversion air compressor Count the protection of the inverter to the motor
In the process of production and use of air compressor motors, improper operation often leads to motor damage, which not only loses money, but also has a greater impact on the production schedule. Therefore, the correct use of the frequency converter has a positive effect on protecting the motor.
09/07/2020
Why can't the lubricating oil in the air compressor be replaced by hydraulic oil
Lubricating oil Lubricant is a kind of lubricant. It is located between two objects in relative motion and has the function of reducing friction between two objects due to contact. In addition, it also has the functions of cooling,
09/07/2020
What should be paid attention to when choosing an adsorption dryer
With the rapid development of China's industrial economy, compressed air has become the second safest energy source after electricity, which is called air source; as compressed air post-processing equipment, dryers have also developed rapidly.
09/07/2020
What is the relationship between compressor speed and air compressor service life
The speed of the screw air compressor has an inevitable relationship with the maintenance cycle of the main compressor. The higher the speed of the head, the service life of the bearing will also be shortened.
09/07/2020
What is the principle of waste heat recovery Good for business
[Why] Air compressors are widely used. During their long-term, continuous operation, electrical energy is converted into mechanical energy and thermal energy according to the principle of energy conservation.
09/07/2020
What is a sliding vane compressor
1, the sliding vane compressor is a positive displacement rotary compressor. It consists of a rotor (with radial slots inside the rotor and sliding vanes installed in the slots) and a stator (or). The rotor rotates in the stator.
09/07/2020
What happens if the water-cooled air compressor is short of water
The cooling methods of screw air compressors are mainly divided into two types: air-cooled and water-cooled. Air-cooled air compressors are a relatively common cooling method and are used in small and medium-sized air compressors.
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
US$2307.69
Panasonic Servo Motor MHMF022L1V2M
US$653.85
Honeywell Solenoid Valve VE4025B1045
US$334.62
ROTEN Mechanical Seal 8E5K-22-X
US$384.62
MAC Solenoid Valve 130B-111CAAA
US$442.31
IFM Sensor IIM209
US$76.92
Festo Air Cylinder CLR-32-20-L-P-A
US$670.38
Banner Sensor Q20PFF150Q7
US$107.70
PARKER Filter 933212Q
US$41.54
BANDO Belt T5-350-8
US$9.62