Omron Sensor EE-SX952-R

07/29/2020

Common sense of wire and cable calculation

What is the maximum current and power that a square wire can pass? How much wire is used for 100KW of electricity for project construction? Large wires cause waste, and small wires have more serious consequences. Here I share with you my estimation experience.

12/28/2022

Classifications of Programmable Logic Controller

The programmable logic controller (PLC) is a digital operation controller with microprocessor for automatic control, which can load control instructions into memory for storage and execution at any time.

09/09/2020

The era of running customers one by one has passed, the air compressor owner must do this!

In the current air compressor industry, there are various basic marketing models such as human tactics, technical marketing, product marketing, and conference marketing.

07/09/2022

Components and Types of Mechanical Seals

A mechanical seal is a device used on a rotating shaft to keep fluids in and contaminants out. It prevents the fluid moved through an asset, most often a centrifugal pump, from leaking.

09/07/2020

Eight advantages of using frequency converter in air compressor

In recent years, China’s call for energy conservation and emission reduction has become increasingly louder, and there has been an increasing demand for energy-saving equipment.

01/06/2023

How to Improve the Quality Factor of the Solenoid Coil?

The quality factor Q is an important parameter reflecting the quality of the solenoid coil, and improving the Q factor of the coil can be said to be one of the key points of winding the coil.

09/02/2020

Discussion on Shared Economy Model of Air Compressor Industry

The sharing economy is the result of technological progress. The characteristic of the property rights of the sharing economy is the leasing economic model in which the owner temporarily surrenders the right to use to obtain income, but this economic model did not form a climate before the Internet era.

06/29/2020

Several causes of compressor burning

06/21/2020

Common failure and analysis of centrifugal air compressor

Common failure and analysis of centrifugal air compressor 1. Abnormal vibration and noise: ① Misalignment ② The compressor rotor is unbalanced ③ The impeller is damaged ④ The bearing is abnormal ⑤ The coupling is faulty or unbalanced ⑥ The sealing ring is bad ⑦ The oil pressure and oil temperature are abnormal ⑧ There is dirt in the oil Clean, wear out the bearing ⑨ Surge ⑩ The stress of the gas pipeline is transmitted to the casing, which causes misalignment ⑪ There is a machine working near the compressor<img src="{{media url=&quot;Common_failure_and_analysis_of_centrifugal_air_compressor.jpg&quot;}}" alt="" />

08/13/2020

Compressor in the industrial chiller system produces wet stroke fault and troubleshooting

In the industrial chiller system, when the compressor sucks in wet steam, frost occurs on the cylinder wall, and the suction temperature and discharge temperature drop significantly. This is the wet stroke of the compressor, commonly known as frost.