Pro-face HMI PFXSP5700TPD

PFXSP5700TPD

Standard product information

Family 

HMI

Series 

SP5000 Series

Size 

15"

Model 

PFXSP5700TPD

Global Code 

PFXSP5700TPD

Product Features 

15" DC Auto Scaling Brightness Sensor (Premium Display)

Repair Status 

✔ (Maintenance service is available, able to be maintained.)

Display specifications

Display type 

TFT Color LCD

Display size 

15"

Resolution 

1,024 x 768 pixels (XGA)

Auto scaling 

Equipped

Effective display area 

W304.1 x H228.1 mm [W11.97 x H8.98 in.]

Display colors 

16 million colors

Backlight 

White LED (Not user replaceable. When replacement is required, contact your local distributor.)

Backlight service life 

50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)

Brightness control 

0 to 100 (Adjusted with touch panel or software)

Brightness sensor 

Equipped

Touch panel type 

Resistive Film (analog, multi-touch)

Touch panel resolution 

1,024 x 1,024

Touch panel lifetime 

1,000,000 times or more

Electrical specifications

Rated input voltage 

12 to 24 Vdc

Input voltage limits 

10.8 to 28.8 Vdc

Allowable voltage drop 

12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less

Power consumption 

Max. 22 W
When power is not supplied to external devices: 19 W or less
Backlight OFF (Stand-by mode): 6 W or less
Backlight adjusted (20%): 11 W or less*1

In-rush current 

30 A or less

Noise immunity 

Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

Voltage endurance 

1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

Insulation resistance 

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

1.Power consumption for Display Module only

Environmental specifications

International safety standards 

Surrounding air temperature 

0 to 60 °C [32 to 140 °F]

Storage temperature 

-20 to +60 °C [-4 to 140 °F]

Ambient humidity 

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Storage humidity 

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Dust 

0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)

Pollution degree 

For use in Pollution Degree 2 environment

Corrosive gases 

Free of corrosive gases

Air pressure (altitude range) 

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance 

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance 

IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times

Electrostatic discharge immunity 

Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)

Interface specifications

USB (Type A) 

Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA
Communication distance: 5 m [16.4 ft.]*2

USB (mini-B) 

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft]

2.When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one barcode reader. If you connect multiple devices that are the same type, only the first device will work.

Structural specifications

Grounding 

Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).

Cooling method 

Natural air circulation

Structure 

When using a factory-installed front USB cover: IP65F, IP67F, Type 1
When using a front USB cover as an option: IP66F, IP67F, Type 1, Type 4X (indoor use only)/13
NOTE: The option is a front USB cover with screw manufactured by Pro-face (Model Number PFXZCDCVUS1).*3

External dimensions 

W397 x H296 x D67 mm [W15.6 x H11.7 x D2.64 in.]

Panel cut-out dimensions 

W383.5 x H282.5 mm [W15.10 x H11.12 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*4

Weight 

4.5 kg [9.93 lb] or less*5

3.The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit's level of resistance is equivalent to these standards, oils that should have no effect on the unit can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the unit's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

4.For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

5.Display module only.

Dimensions

External dimensions 

Display module and box module combination

Panel cut-out dimensions 

A	B	C
383.5 (+1/-0) mm [15.1 (+0.04/-0)] in.	282.5 (+1/-0) mm [11.12 (+0.04/-0)] in.	1.6 to 5 mm [0.06 to 0.2] in.

External dimensions with cable 

(Image of Open Box)

*1Rotation area of the fastener

*2Pitch of center of installation fastener screws