SAND Transmitter PT3716-G3/4"-95MPa-152

06/29/2020

Causes of non-condensable gas in refrigeration system

Causes of non-condensable gas in refrigeration system 1. Insufficient emptying of the refrigeration system before charging the refrigerant Before charging the refrigerator, the compressor cylinder in the refrigeration system, the condenser, the evaporator, and the piping of the system were filled with air. In order to eliminate these air before charging the refrigerant, the interior of the refrigeration system Vacuuming,

08/02/2020

What should I do if the geothermal exhaust valve leaks

Water leakage from the geothermal exhaust valve is very common. Under normal circumstances, when the heating is first delivered in winter, the geothermal pipe needs to be exhausted so that the exhaust can make the heating of the underfloor heating loop uniform.

08/18/2020

How to replace the lubricating oil and filter drier of the chiller

After the chiller is used for a long time, the lubricating oil will inevitably be contaminated or acidified. Therefore, we must pay attention to the change of oil quality during the operation of the unit.

08/15/2020

The difference between cold storage aluminum row evaporator and seamless steel tube evaporator

When we choose to install cold storage, we usually encounter material selection problems. The advantages of the aluminum row evaporator are space saving, lightness, energy saving and environmental protection, convenient installation, etc.

09/21/2020

Application of synthetic lubricating oil in processing and hydrocarbon gas presses

1. Hydrocarbon and process gas compressor lubricants Historically, hydrocarbon, chemical processing and inert industrial gas compressors have used traditional mineral oil-based lubricants. However, mineral oil cannot meet the needs of many modern rotary compressor designs and other complex applications. A typical gas processing application is at an outflow temperature of 80-1100C and a pressure of 7-70barg.

09/09/2020

What are the requirements of light industry for air compressors

The application industry of air compressors is very wide, which can be said to be all walks of life, but it is worth mentioning that different industries have different requirements for air compressors. Let's introduce the requirements of light industry for air compressors!

12/13/2022

Differences between Rolling and Sliding Linear Guideways

Linear guideways are often referred to as guides for short, and their function is to support and guide moving parts for linear reciprocating motion along a given trajectory and stroke.

08/16/2020

Two major issues that should be paid attention to when installing and wiring fan coil thermostats

The fan coil unit has a compact structure, sturdiness and durability, and usually adopts high-quality galvanized sheet casing. The condensing surface-mounted air duct water pan is integrally formed by a molding process

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

09/09/2020

Compared with frequency conversion air compressor, what are the problems of traditional air compressor

Compared with frequency conversion air compressors, traditional air compressors have certain shortcomings. What are the manifestations? Next, the editor of okmarts.com will tell you what are the problems with traditional air compressors.