Sanyo Denki Fan 9WF0824S4D03

09/04/2020

The difference between ordinary asynchronous motor and variable frequency motor

1. Ordinary asynchronous motors are designed according to constant frequency and constant voltage, which cannot fully meet the requirements of variable frequency speed regulation

08/19/2020

The top ten coal-to-electricity installation misunderstandings this winter may cause air source manufacturers to stumble

With the arrival of the 2020 Detroit heating season, nearly 100,000 air-source heat pump heating systems that have been installed in a dozen suburbs of Detroit before have begun to intensively accept the test of the cold winter.

08/13/2020

How to install the cold storage air curtain How much do you know about these technologies

The function and technology of installing the air curtain above the cold storage door, we must first understand why the cold storage needs to install the air curtain. The air curtain prevents the convection of indoor and outdoor air,

08/17/2020

The difference between a single-head chiller and a double-head chiller

1. Single-stage refrigeration system 　　1. The single-stage refrigeration cycle refers to the four processes of compression, condensation, throttling,

07/02/2020

Danfoss Miele Maneurop compressor MT40 market information

Danfoss Miele Maneurop compressor MT40 market information Meiyoule compressor model; Danfoss Meiyoule Maneurop compressor MT40; Meiyou MT40 horsepower: 3.3hp

06/29/2020

How the compressor works

03/06/2024

Intake vs. Exhaust Fans: Understanding Their Roles, Differences ＆ Applications

In the realm of ventilation and climate control, the roles of intake and exhaust fans are pivotal.

07/15/2024

Solenoid Valves: Components and Types

The solenoid valve is a fluid control device, usually used in automatic control circuits. It is actually an "automatic switch" that uses an electrical signal with a smaller current and voltage to control the opening and closing of the fluid pipeline.

09/04/2025

AC Compressor Bearing - Working Principle & Troubleshooting

Bearings play an irreplaceable role in mechanical design. They involve very wide applications.

09/16/2020

Why can't I repair the cold welding machine Easy to fall off

Question: Why can't the patching machine be fixed? Easy to fall off? Answer: The main reasons for the failure to fix are: 1. The surface of the mold is not cleaned, and there are impurities such as oil, dirt, and oxides between the supplement and the mold.