Schneider PLC TSXRKS8

01/25/2024

Industrial Control Cabinet Cooling: How to Design the Cooling and Ventilation System?

Control cabinets, such as wind turbine electrical control cabinets, realize system power distribution, monitoring and control of the entire unit.

08/19/2020

How to choose refrigerant for different types of industrial chillers

We all know that the working temperature of medium and high temperature chillers can be controlled between 3°C and 35°C, low temperature chillers can also be controlled between 0°C and -60°C,

08/11/2020

What will happen if the thermal expansion valve is configured too large

A 10P air-conditioning unit is equipped with a 12-ton (1 cooling ton=3.517KW) expansion valve. What will happen?<br></br> 　　 If you follow the DANFOSS selection software, this configuration will not be recommended (all think this type of selection is too large)<br></br>

04/10/2024

Servo Control, Step Control and Variable Frequency Control: Detailed Explanation of the Three Major Controls

The following introduces the working principle, structure, types and application of the three major control methods of servo, step and variable frequency.

08/03/2020

Five classification functions of cold storage installation cold storage function

The refrigerated distribution center is developed based on the two needs of the rationalization of refrigerated logistics and the development of the market.

09/06/2020

Filter structure and material selection

Generally speaking, a filter refers to an accessory that filters impurities or gases through filter paper; according to different filtering functions, it can be divided into: oil filter, fuel filter, air filter, air conditioning filter Wait

07/12/2022

How to Choose an Air Compressor

Choosing an air compressor can leave you feeling lost if you don't know what to look for. That's because air compressors power a wide range of tools over a wide range of applications.

06/29/2020

How the compressor works

08/20/2020

Operation management of wet stroke of refrigeration compressor

The wet stroke of the compressor is caused by the liquid refrigerant entering the cylinder. When the amount of liquid entering is small, frost will form on the outside of the cylinder.

08/19/2020

Be vigilant What is the hazard if the cooling tower is floating

With the development of the times, cooling towers are widely used in various industries. Among them, the phenomenon of cooling tower floating water has a great impact on the safety of