Detailed Technical Parameters Product Features System Hardware: Receiver Compatible Emitter: 1113232 Resolution: 30 mm Scanning Range: 4.5 m Protection Zone Height: 450 mm Response Time: 10 ms No Safety Blind Zone: Yes Synchronization: Optical Synchronization Scope of Supply: Receiver, Test rod diameter complies with safety light curtain resolution, Safety Precautions, Installation Instructions, Download Operation Guide Safety Technical Parameters Type: Type 4 (IEC 61496-1) Safety Integrity Level: SIL 3 (IEC 61508) Category: Category 4 (ISO 13849-1) Performance Level: PL e (ISO 13849-1) PFHD (Dangerous Failure Rate per Hour): 3.7 x 10⁻⁹ TM (Continuous Operation Time): 20 years (ISO 13849-1) Safety in Error Conditions: At least one output signal switching device in the off state. Function Protection Operation: ✓ Interface System Interface: M12 male connector, 5 pins Display Elements: LEDs Electrical Parameters Protection Class: III (IEC 61140) Supply Voltage UV: 24 V DC (19.2 V... 28.8 V) Residual Ripple: ≤ 10 % (1) Typical Power Consumption: 2.19 W (DC) Safety Output (OSSD) Output Mode: 2 PNP semiconductors, short - circuit protection, monitored cross - circuit (2) On - state, Switching Voltage HIGH: 24 V DC (UV - 2.25 V DC... UV) Off - state, Switching Voltage LOW: ≤ 2 V DC Current Load Capacity per OSSD: ≤ 300 mA (1) Within the UV limit range. (2) Applies to voltages in the range of -30 V and +30 V. Mechanical Parameters Dimensions: Refer to dimension drawing Housing Material: Aluminum Extrusion Weight: 411 g (± 50 g) Environmental Parameters Enclosure Protection Rating: IP65 (IEC 60529), IP67 (IEC 60529) Operating Ambient Temperature: -30 °C... +55 °C Storage Temperature Range: -30 °C... +70 °C Air Humidity: 15 %... 95 %, non - condensing Vibration Resistance: 5... 150 Hz, 3.5 mm / 1 g (EN 60068-2-6) Shock Resistance: 15 g / 6 ms (EN 60068-2-27) Classification: 3M4 (IEC TR 60721-4-3)