Water tower maintenance tips for industrial chillers

Water tower maintenance tips for industrial chillers

We know that because of its easy installation and high work efficiency, the stainless steel water tower is loved by more and more people and has now become the main tool for construction sites and residential buildings. Next, I will analyze the water tower maintenance tips of industrial chillers.

   First of all, after the stainless steel water tower is used, the hoses and other parts should be cleaned first, and special attention should be paid to removing the grease on the pump and the soil in the recessed part of the liquid tank bottom. Especially after spraying Bordeaux mixture and other corrosive pesticides, it is best to soak in alkaline water for 1-2 hours. Take care to prevent rust. All parts that can be disassembled must be removed and cleaned. The inner pipe wall of the spray rod and nozzle should be painted with engine oil to avoid damp and rust.

  Secondly, check whether the connections are leaking. When using, install the clean water pipe for trial, and then install other things. When adding water, ensure that the stainless steel water tower is unobstructed, and the liquid level cannot exceed the safe water level. Before use, open the water tower in advance to increase the air pressure in the barrel to the working pressure to ensure smooth water flow.

   Finally, the core components of the electric sprayer are the water pump and the battery. Although there are several types of pumps on the market, these pumps are afraid of clogging. Therefore, you must use clean water to prepare the medicine. When adding water, you must use a small filter to filter it to prevent clogging.

   If the sprayer is not to be used for a short period of time, the main parts should be cleaned, wiped dry, and stored in a cool and dry place. If it is not used for a long time, grease all metal parts to prevent rust.

   Water-cooled screw chillers should not have water in the water tower after they are out of service, which will cause some water pipes to be blocked, and it may also make the next use of it blocked. Therefore, use it every one or two months.

Recent related posts

Customers frequently viewed

New In stock for sale, IWAYA DENKI Water Pump 25CJT0752

IWAYA DENKI Water Pump 25CJT0752

US$2307.69
New In stock for sale, ROTEN Mechanical Seal 8E5K-22-X

ROTEN Mechanical Seal 8E5K-22-X

US$384.62
New In stock for sale, Omron Switch D4C-1229-P

Omron Switch D4C-1229-P

US$47.69
New In stock for sale, Sanyo Denki Fan 9G1224G102

Sanyo Denki Fan 9G1224G102

US$30.58
New In stock for sale, HABASIT Belt TC-20EF 1070X20

HABASIT Belt TC-20EF 1070X20

Contact Us
New In stock for sale, Banner Sensor Q45VR3DQ

Banner Sensor Q45VR3DQ

US$230.78
New In stock for sale, Bristol Compressor H27B18QCBC

Bristol Compressor H27B18QCBC

US$774.65
New In stock for sale, SMC Solenoid Valve SY9120-6GD-03

SMC Solenoid Valve SY9120-6GD-03

US$150.00
New In stock for sale, EACO Capacitor MKP 1200V 3.3UF

EACO Capacitor MKP 1200V 3.3UF

US$1.27