Product Specification: deTec4 Application Field: Standard industrial environment System Hardware: Pair Resolution: 30 mm Scanning Range: 30 m Protected Area Height: 300 mm Response Time: 9 ms (unencoded); 12 ms (encoded 1 or encoded 2) No Safety Blind Zone: Yes Synchronization: Optical synchronization Safety Technical Parameters Type: Type 4 (IEC 61496 - 1) Safety Integrity Level: SIL 3 (IEC 61508) Category: Category 4 (ISO 13849 - 1) Performance Level: PL e (ISO 13849 - 1) PFH₀ (Probability of Dangerous Failure per Hour): Single device: 15.3 x 10⁻⁹ With one slave device cascaded: 30.5 x 10⁻⁹ With two slave devices cascaded: 45.6 x 10⁻⁹ Electrical Parameters Protection Class: III (IEC 61140) Supply Voltage Uᵥ: 24 V DC (19.2 V... 28.8 V) Residual Ripple: ≤ 10 % Safe Output (OSSD): Output Type: 2 PNP semiconductors, short - circuit protection, cross - circuit monitoring On - State, Switching Voltage HIGH: 24 V DC (Uᵥ - 2.25 V DC... Uᵥ) Off - State, Switching Voltage LOW: ≤ 2 V DC Current - Carrying Capacity per OSSD: ≤ 500 mA Diagnostic Information Output (ADO): Output Type: PNP semiconductor, short - circuit protection Output Voltage HIGH (activated): ≥ Uᵥ - 3 V Output Voltage LOW (disabled): High impedance Output Current HIGH (activated): ≤ 100 mA Environmental Parameters Outer Shell Protection Level: IP65 (IEC 60529); IP67 (IEC 60529) Operating Environment Temperature: - 30 °C... + 55 °C Storage Temperature Range: - 30 °C... + 70 °C Air Humidity: 15 %... 95 %, non - condensing Vibration Resistance: 5... 150 Hz, 3.5 mm / 1 g (EN 60068 - 2 - 6) Shock Resistance: 15 g / 6 ms (EN 60068 - 2 - 27) Classification: 3M4 (IEC TR 60721 - 4 - 3) Other Information Wavelength: 850 nm Light Source Type: Near - infrared (NIR), invisible Integrated Laser - Assisted Calibration Device: Laser Class: 1 Wavelength: 650 nm Light Source Type: Visible red light