SG7I15SB SPG Motor I. General Specifications Poles and Type: The SG7I15SB is a 1 - pole, single - phase induction motor. Its single - pole structure impacts its rotational characteristics. Power Supply: It operates on a single - phase voltage of 230V and can work with frequencies of 50Hz and 60Hz, providing flexibility for different electrical systems. II. Performance Metrics Duty: Rated for continuous duty (Cont. S1), this motor can run steadily for long periods, suitable for applications like industrial machinery or automated equipment. Rated Load: At 50Hz, the rated current is 0.18A, the rated speed is 1250r/min, and the rated torque is 1.10 kgf·cm (110 mN·m). At 60Hz, the rated current is 0.15A, the rated speed is 1550r/min, and the rated torque is 0.90 kgf·cm (90 mN·m). Starting Torque: The starting torque is 0.80 kgf·cm (80 mN·m) for both frequencies, helping the motor start smoothly under load. Capacitor: It uses a 1.0μF capacitor rated at 450V, which is important for the motor's electrical operation, especially for starting and speed - maintaining. III. Protection and Certification Degree of Protection: With an IP23 protection rating, it protects against solid objects larger than 12.5mm and water spray within 15 degrees from the vertical, suitable for various working environments. Insulation Classification: The insulation classification is B(130), meaning it can withstand a maximum temperature of 130°C, ensuring reliable performance and safety. Protected Type: It is thermally - protected (T.P.). Also, all models in the SG series, including the SG7I15SB, have obtained UL, TÜV, and CCC certifications, guaranteeing quality and compliance with safety standards.