SUNX Sensor PM-T45-C3

09/16/2020

The development of screw air compressor

Since the advent of screw compressors in 1934, after decades of technological improvement, screw compressors have been widely used, especially in refrigeration.

02/01/2023

What is Gear Ratio?

Gear ratio, i.e., the reduction ratio of the reducer, refers to the ratio of the instantaneous input speed to the output speed in the reduction mechanism, and is represented by the symbol "i".

09/09/2020

Calculation method for determining air consumption of air compressor

The traditional method of determining the compressed air requirements of a new plant is to add up the air consumption (m³/min) of all air-consuming equipment, and then consider adding a safety, leakage and development factor.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/18/2020

Reasons for abnormal evaporation temperature of refrigeration equipment

1. The evaporation temperature is low<br></br> 　　 There are many reasons for the low evaporation temperature. The mechanism that leads to the low evaporation temperature is that there is less refrigerant in the evaporator or poor heat exchange in the evaporator, as listed below:

08/15/2020

Failure Forms and Preventive Measures of Parts of Shell and Tube Heat Exchanger

1. The structure of the shell and tube heat exchanger<br></br> The shell and tube heat exchanger is a traditional and most widely used heat exchange equipment. Because it has a strong structure and can be made of a variety of materials

06/14/2020

Global Refrigeration Compressor Market Overview 2020: Emerson, HITACHI, GMCC, Huangshi Dongbei, Landa

The market study namely Global Refrigeration Compressor Market 2020 by Manufacturers, Regions, Type and Application, Forecast to 2025 shows a focused situation of key industry players combined with their market share, deals, and development prospects.

08/16/2020

What are the basic conditions needed to install industrial chillers

With the continuous development of society, many companies have a great demand for refrigeration. The continuous development of science and technology also makes companies

06/21/2020

Common failure and analysis of centrifugal air compressor

Common failure and analysis of centrifugal air compressor 1. Abnormal vibration and noise: ① Misalignment ② The compressor rotor is unbalanced ③ The impeller is damaged ④ The bearing is abnormal ⑤ The coupling is faulty or unbalanced ⑥ The sealing ring is bad ⑦ The oil pressure and oil temperature are abnormal ⑧ There is dirt in the oil Clean, wear out the bearing ⑨ Surge ⑩ The stress of the gas pipeline is transmitted to the casing, which causes misalignment ⑪ There is a machine working near the compressor<img src="{{media url=&quot;Common_failure_and_analysis_of_centrifugal_air_compressor.jpg&quot;}}" alt="" />

07/22/2022

How to Prime a Water Pump

Water pumps will run out of pressure and stop working if turned off for an extended period of time, such as over the winter.