TOKY Relay HD4-RC41B

06/30/2020

What are the causes of compressor overheating

What are the causes of compressor overheating Some causes of compressor overheating: high return air temperature, large motor heating capacity, high compression ratio, high condensing pressure, and improper refrigerant selection.

09/06/2020

Application of Piston Rod Settlement Monitoring System in Reciprocating Compressor

1. Introduction A petrochemical plant imported a reciprocating compressor from abroad, the model is: B254-4118N3.3, 4 rows of symmetrical balanced type, the import and export parameters are: 135kPa (A)@14℃, 3.4MPa (A)@35℃, rotation speed: 425r/min, stroke: 240mm.

11/15/2024

Understand VFD Better by Wiring the Main Circuit and Control Circuit

1.1 Open the cover by squeezing the grooves on both sides of the VFD(variable frequency drive), remove the wire baffle, connect the terminals R, S, T to the power, connect the terminals U, V, W to the motor, and connect the earth wire at the ground symbol.

02/23/2022

How to Extend the Service Life of a Compressed Air Tank

Gas storage tanks, a kind of important special equipment, form a storage system for compressed air to reduce pressure fluctuations.

04/15/2022

What is A Thermal Mass Flowmeter?

TMF is the abbreviation of thermal mass flowmeter. The thermal mass flowmeter can also be called the thermal gas flowmeter.

06/29/2020

How the compressor works

06/27/2020

The sign of the normal operation of the refrigeration unit

The sign of the normal operation of the refrigeration unit 1. There is no knocking sound in the piston refrigeration compressor, the compressor is operating normally, the expansion valve opening is adjusted properly, and there is only compressor suction and exhaust sound during operation, and no knocking or other abnormal sounds are produced.

09/18/2020

Copeland compressor scroll series product introduction

The simple concept of Copeland Scroll compressor scroll was first invented in 1905. The scroll is an involute spiral, which meshes with the matching scroll as shown above, forming a series of gradually expanding spaces between the two components.

01/07/2021

The method to identify the failure of the totally enclosed refrigeration compressor is very effective!

The method to identify the failure of the totally enclosed refrigeration compressor is very effective! 1. How to identify the three binding posts on the casing of the hermetic compressor? Running end (R), starting end (S), common end (C), the re器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱

08/17/2020

Five important points for attention when selecting piston chillers

The main control parameters of piston chillers are energy efficiency ratio, rated cooling capacity, input power, refrigerant type, power supply voltage, etc. Below, the editor of okmarts.com introduces the selection points of piston chillers in detail.