Type

CP M SNT 120W 24V 5A

Order No.

8951340000

Version

Power supply, switch-mode power supply unit, 24 V

GTIN (EAN)

4032248742554

Qty.

1 pc(s).

Availability

Delivery date on request

Width

40 mm

Width (inches)

1.575 inch

Height

130 mm

Height (inches)

5.118 inch

Depth

125 mm

Depth (inches)

4.921 inch

Net weight

724.3 g

Operating temperature, max.

70 °C

Operating temperature, min.

-25 °C

Storage temperature, max.

85 °C

Storage temperature, min.

-40 °C

Operating temperature

-25 °C...70 °C

Storage temperature

-40 °C...85 °C

REACH SVHC

Lead 7439-92-1

Certificate No. (cURus)

E255651

AC current consumption

1.1 A @ 230 V AC / 2.0 A @ 115 V AC

AC input voltage range

85...264 V AC (derating at 100 V AC)

Connection system

Screw connection

DC current consumption

0.4 A @ 370 V DC / 1.2 A @ 120 V DC

DC input voltage range

80...370 V DC (Derating @ 120 V DC)

Frequency range AC

47...63 Hz

Input fuse

Yes

Input fuse (internal)

Yes

Inrush current

max. 40 A

Rated input voltage

100...240 V AC (wide-range input)

Recommended back-up fuse

4 A / DI, safety fuse
6 A, Char. B, circuit breaker
3...5 A, Char. C, circuit breaker

Wire connection method

Screw connection

Continous output current @ U_Nominal

6.0 A @ 45 °C, 5.3 A @ 55 °C, 3.8 A @ 70 °C

Nominal output current for U_nom

5 A @ 60 °C

Output current

5 A

Output power

120 W

Output voltage

24 V

Output voltage

22.5...29.5 V (adjustable via potentiometer on front)

Output voltage type

DC

Overload protection

Yes

Parallel connection option

yes, max. 5

Rated output voltage

24 V DC ± 1 %

Reserve capacity @ U_Nominal

6 A for 1 min, ED = 5 %

Residual ripple, breaking spikes

< 50 mV_PP @ 24 V DC, I_N

Wire connection method

Screw connection

AC failure bridging time @ I_nom

> 100 ms @ 230 V AC / > 20 ms @ 115 V AC

Current limiting

> 120% I_N

Degree of efficiency

90 % @ 230 V AC / 88 % @ 115 V AC

Housing version

Metal, corrosion resistant

Indication

Operation, green LED

MTBF

> 500,000 h in accordance with IEC 61709 (SN29500)

Mounting position, installation notice

Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.

Operating temperature

-25 °C...70 °C

Power factor (approx.)

> 0.5 @ 230 V AC / > 0.6 @ 115 V AC

Protection against over-heating

Yes

Protection against reverse voltages from the load

30…35 V DC

Protection degree

IP20

Short-circuit protection

Yes

Output current

5 A

Limiting of mains voltage harmonic currents

According to EN 61000-3-2

Noise emission in accordance with EN55032

Class B

Interference immunity test acc. to

EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips)

Shock resistance IEC 60068-2-27

30 g in all directions

Insulation voltage

3 kV input/ouput; 2 kV input/earth; 0.5 kV output/earth

Pollution severity

2

Protection class

I, with PE connection

electrical isolation, input-earth

2 kV

electrical isolation, input-output

3 kV

electrical isolation, output-earth

0.5 kV

Electrical machine equipment

Acc. to EN60204

For use with electronic equipment

Acc. to EN50178 / VDE0160

Protection against dangerous shock currents

Acc. to VDE0106-101

Protective separation / protection against electrical shock

VDE0100-410 / acc. to DIN57100-410

Safety extra-low voltage

SELV according to EN 60950, PELV according to EN 60204

Safety transformers for switch-mode power supplies

According to EN 61558-2-16

Conductor cross-section, AWG/kcmil , max.

12 

Conductor cross-section, AWG/kcmil , min.

26 

Conductor cross-section, flexible , min.

0.5 mm²

Conductor cross-section, rigid , max.

6 mm²

Conductor cross-section, rigid , min.

0.5 mm²

Connection system

Screw connection

Number of terminals

3 for L/N/PE

Tightening torque, max.

0.6 Nm

Tightening torque, min.

0.5 Nm

Wire connection cross section, flexible (input), max.

2.5 mm²

Conductor cross-section, AWG/kcmil , max.

12 

Conductor cross-section, AWG/kcmil , min.

26 

Conductor cross-section, flexible , max.

2.5 mm²

Conductor cross-section, flexible , min.

0.5 mm²

Conductor cross-section, rigid , max.

6 mm²

Conductor cross-section, rigid , min.

0.5 mm²

Number of terminals

5 (++ / ---)

Tightening torque, max.

0.6 Nm

Tightening torque, min.

0.5 Nm

Connect Power PRO-M

PRO-M = Power-Reliable-Optimized

The perfectly reliable power supply for automation technology.

The ten different versions for the 24V-DC power supply all feature a solid but thin metal housing which enables them to be installed without any side gaps. This results in less space required on the mounting rail. Wide range of AC/DC inputs and a wide temperature range enable them to be used anywhere. Because of its high efficiency, resistance to overloads and high power reserves, the PRO-M is a trusted power supply for use in any application. The three-phase PRO-M power supply modules continue to function reliably when one phase fails (i.e., in two-phase mode).