✔ In Stock (Can ship in 5-7 days)

Online Support 24/7
12 Months Warranty for New Products
30 Days Money Back Guarantee
Weidmuller Power Supply CP DC UPS 24V 20A 1370050010
General ordering data
|
Type |
CP DC UPS 24V 20A/10A |
|
Order No. |
1370050010 |
|
Version |
UPS control unit |
|
GTIN (EAN) |
4050118202335 |
|
Qty. |
1 pc(s). |
|
Availability |
Delivery date on request |
Dimensions and weights
|
Width |
66 mm |
|
Width (inches) |
2.598 inch |
|
Height |
130 mm |
|
Height (inches) |
5.118 inch |
|
Depth |
150 mm |
|
Depth (inches) |
5.905 inch |
|
Net weight |
1,146 g |
Temperatures
|
Humidity |
5...95 %, no condensation |
|
Operating temperature, max. |
70 °C |
|
Operating temperature, min. |
-25 °C |
|
Storage temperature, max. |
85 °C |
|
Storage temperature, min. |
-40 °C |
|
Operating temperature |
-25 °C...70 °C |
|
Storage temperature |
-40 °C...85 °C |
Environmental Product Compliance
|
REACH SVHC |
Lead 7439-92-1 |
Battery module
|
Parallel connection option |
Yes, max. 2 |
|
Rated voltage |
24 V |
|
Storage medium |
1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch |
Integrated battery charger
|
Battery availability test |
every minute |
|
Charging current |
0.15 CA |
|
Charging feature |
IU characteristic curve |
|
Charging voltage (temperature compensated) |
27, 48 V @ 20°C |
|
Temperature coefficient |
- 48 mV / °C |
Operating interfaces and control inputs
|
DIP switch |
Inversion of transistor outputs, Operation without temperature probe |
|
Output current selector switch |
20 A, 10 A |
|
Remote disconnection (Interlock) |
Yes |
|
Selector switch battery |
1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, No Battery, Service |
|
Selector switch buffer times |
0.5 min, 1 min, 3 min, 5 min, 10 min, 20 min, 30 min, 45 min, ∞, ∞ w/0 |
|
Temperature probe |
NTC 100 kΩ |
Input
|
DC current consumption |
max. 200 mA (without battery), max. 0.5 A (with fully charged battery) |
|
DC input voltage range |
20...30 V DC |
|
Input current |
≤ 13A (for 10A), ≤ 23A (for 20A) |
|
Input fuse (internal) |
Yes |
|
Max. approved input current |
28 A |
|
Rated input voltage |
24 V DC |
|
Wire connection method |
Screw connection |
Output
|
Continous output current @ UNominal |
24 A @ 45 °C, 20 A @ 60 °C, 15 A @ 70 °C |
|
Nominal output current for Unom |
20 A @ 60 °C |
|
Output current, max. |
24 A |
|
Output voltage |
Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin - 0.3 V battery supply (I max) |
|
Overload protection |
Yes |
|
Parallel connection option |
Yes, max. 2, Yes, with diode module |
|
Protection against inverse voltage |
Yes |
|
Rated output voltage |
24 V DC ± 1 % |
|
Reserve capacity @ UNominal |
24 A for 1 min, ED = 5 % |
|
Residual ripple, breaking spikes |
< 50 mVPP @ 24 V DC, IN |
|
Temperature coefficient |
- 48 mV / °C |
|
Temperature probe |
NTC 100 kΩ |
|
Wire connection method |
Screw connection |
General data
|
Buffer times |
Depending on the connected battery |
|
Clip-in foot |
metal |
|
Current limiting |
> 120% IN |
|
Degree of efficiency |
≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode |
|
Housing version |
Metal, corrosion resistant |
|
Humidity |
5...95 %, no condensation |
|
MTBF |
> 500,000 h in accordance with IEC 61709 (SN29500) |
|
Mounting position, installation notice |
Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
|
Operating temperature |
-25 °C...70 °C |
|
Power loss |
< 10 W |
|
Protection against reverse voltages from the load |
32…34 V DC |
|
Protection degree |
IP20 |
|
Short-circuit protection |
Yes |
|
Storage medium |
1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch |
|
Surge voltage category |
III |
EMC/shock/vibration
|
Noise emission in accordance with EN55032 |
Class B |
|
Vibration resistance IEC 60068-2-6 |
2.3 g |
|
Interference immunity test acc. to |
EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips) |
|
Shock resistance IEC 60068-2-27 |
30 g in all directions |
Insulation coordination
|
Insulation voltage |
1 kV DC |
|
Pollution severity |
2 |
|
Protection class |
III, with no ground connection, for SELV |
|
Surge voltage category |
III |
|
electrical isolation, input-earth |
1 kV |
|
electrical isolation, output-earth |
1 kV |
Electrical safety(applied standards)
|
Electrical machine equipment |
Acc. to EN60204 |
|
For use with electronic equipment |
Acc. to EN50178 / VDE0160 |
|
Protection against dangerous shock currents |
Acc. to VDE0106-101 |
|
Protective separation / protection against electrical shock |
VDE0100-410 / acc. to DIN57100-410 |
|
Safety extra-low voltage |
EN 60950 |
|
Safety transformers for switch-mode power supplies |
According to EN 61558-2-16 |
Connection data(Input)
|
Conductor cross-section, AWG/kcmil , max. |
6 |
|
Conductor cross-section, AWG/kcmil , min. |
26 |
|
Conductor cross-section, flexible , min. |
0.5 mm² |
|
Conductor cross-section, rigid , max. |
16 mm² |
|
Conductor cross-section, rigid , min. |
0.5 mm² |
|
Reverse polarity protection |
Yes |
|
Tightening torque, max. |
1.5 Nm |
|
Tightening torque, min. |
1.2 Nm |
|
Wire connection cross section, flexible (input), max. |
|
Connection data(output)
|
Conductor cross-section, AWG/kcmil , max. |
6 |
|
Conductor cross-section, AWG/kcmil , min. |
26 |
|
Conductor cross-section, flexible , max. |
16 mm² |
|
Conductor cross-section, flexible , min. |
0.5 mm² |
|
Conductor cross-section, rigid , max. |
16 mm² |
|
Conductor cross-section, rigid , min. |
0.6 mm² |
|
Tightening torque, max. |
1.5 Nm |
|
Tightening torque, min. |
1.2 Nm |
Connection data(signal)
|
Wire connection cross-section, flexible (signal), max. |
16 mm² |
|
Wire connection cross-section, flexible (signal), min. |
0.5 mm² |
|
Wire connection method |
Screw connection |
|
Wire cross-section, AWG/kcmil , max. |
12 |
|
Wire cross-section, AWG/kcmil , min. |
26 |
|
Wire cross-section, solid , max. |
16 mm² |
|
Wire cross-section, solid , min. |
0.5 mm² |
Signaling
|
Floating contact |
Yes |
|
Status indicator |
Three-colour LED: Battery capacity >85% green, >40% yellow, >20% red, <20% red (Flashing), Green/yellow LED: normal / buffering, Yellow/red LED: temperature alarm / alarm, Yellow/red LED: switch-off / battery fault |
|
Status relay (max. load) |
Fault (alarm) (30 V AC/DC 0.1 A), Battery operation (buff.) (30 V AC/DC 0.1 A), Laden (Charg.) (30V AC/DC 0,1A) |
Connect Power
CP DC UPS 24V 20A/10A
The UPS control unit together with the associated battery module and the power supply unit form a complete DC UPS system. In normal operation, the input voltage from the UPS control unit is connected directly to the load. In the event of a mains failure (drop of the DC input voltage) the system switches instantly to battery operation.
Once the mains supply has been restored, the system switches back to normal operation and the battery is fully recharged by the integrated charger.
Three relay outputs, as well as three additional active transistor outputs and a control input to lock battery operation, provide full remote control by means of SPS or DCS control. Numerous modes of operation and an easy- to-use status display provide rapid fault diagnosis and optimum customisation to the application.
General ordering data
Type CP DC UPS 24V 20A/10A
Order No. 1370050010
Version UPS control unit
GTIN (EAN) 4050118202335
Qty. 1 pc(s).
Technical data
Dimensions and weights
Width 66 mm Width (inches) 2.598 inch
Height 130 mm Height (inches) 5.118 inch
Depth 150 mm Depth (inches) 5.905 inch
Net weight 1,146 g
Temperatures
Humidity 5...95 %, no condensation Operating temperature, max. 70 °C
Operating temperature, min. -25 °C Storage temperature, max. 85 °C Storage temperature, min. -40 °C Operating temperature -25 °C...70 °Storage temperature -40 °C...85 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Battery module
Parallel connection option Yes, max. 2 Rated voltage 24 V
Storage medium: 1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Integrated battery charger
Battery availability test:every minute
Charging current: 0.15 CA
Charging feature:IU characteristic curve
Temperature coefficient:- 48 mV / °C
Charging voltage (temperature compensated):27, 48 V @ 20°C
Operating interfaces and control inputs
DIP switch: Inversion of transistor outputs, Operation without temperature probe
Remote disconnection (Interlock): Yes
Selector switch buffer times: 0.5 min, 1 min, 3 min, 5min, 10 min, 20 min, 30
min, 45 min, ∞, ∞ w/0
Temperature probe:NTC 100 kΩ
Output current selector switch:20 A, 10 A
Selector switch battery:1.3 Ah, 3.4 Ah, 7.2 Ah,12 Ah, 17 Ah, No Battery,Service
Input
DC current consumption :max. 200 mA (without battery), max. 0.5 A (with fully charged battery)
Input current: ≤ 13A (for 10A), ≤ 23A (for20A)
DC input voltage range 20...30 V DC
Input fuse (internal):Yes
Max. approved input current:28 A
Rated input voltage:24 V DC
Wire connection method: Screw connection
Output
Continous output current @ UNominal :24 A @ 45 °C, 20 A @ 60°C, 15 A @ 70 °C
Output current, max.:24 A
Overload protection:Yes
Nominal output current for Unom:20 A @ 60 °C
Output voltage:Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin- 0.3 V battery supply (Imax)
Parallel connection option: Yes, max. 2, Yes, with diode module
Protection against inverse voltage :Yes
Rated output voltage 24 V DC ± 1 %
Reserve capacity @ UNominal: 24 A for 1 min, ED = 5 %
Residual ripple, breaking spikes:< 50 mVPP @ 24 V DC, IN
Temperature coefficient: - 48 mV / °C
Temperature probe:NTC 100 kΩ
Wire connection method: Screw connection
General data
Buffer times :Depending on the connected battery
Current limiting:> 120% IN
Clip-in foot: metal
Degree of efficiency: ≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode
Housing version: Metal, corrosion resistant
Humidity:5...95 %, no condensation
MTBF:> 500,000 h in accordance with IEC61709 (SN29500)
Mounting position, installation notice: Horizontal on TS35
mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
Operating temperature:-25 °C...70 °C
Power loss < 10 W
Protection against reverse voltages from the load: 32…34 V DC
Short-circuit protection:Yes
Surge voltage category:III
Protection degree:IP20
Storage medium 1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
EMC / shock / vibration
Noise emission in accordance with EN55032:Class B
Interference immunity test acc. to :
EN 61000-4-2 (ESD)|
EN 61000-4-3 and EN
61000-4-8 (fields)|EN
61000-4-4 (burst)|EN
61000-4-5 (surge)|EN
61000-4-6 (conducted)|
EN 61000-4-11 (dips)
Vibration resistance IEC 60068-2-6:2.3 g
Shock resistance IEC 60068-2-27:30 g in all directions
Ask questions
(0/1,200)
- Q: How can I participate in limited-time sales or flash sales?
A: Limited-time sales or flash deals usually occur within specific periods. You just need to visit the website when the activities start, select the desired items, and place an order to participate.
- Q: Can I save my payment information for faster checkout?
A: We prioritize the security of your payment information and do not store sensitive payment details on our servers. However, you may have the option to securely save your payment information with trusted third-party payment processors for faster checkout on future orders.
- Q: How can I find out about upcoming sales or new product releases?
A: To stay informed about upcoming sales and new product releases, you can subscribe to our newsletter or follow us on social media platforms. We regularly share updates, promotional offers, and exclusive discounts with our subscribers and followers.
Reviews
- C
Casey Conrad
May 21, 2025
Weidmuller Power Supply CP DC UPS 24V 20A 1370050010I love their products and service, but I wish they offered net terms.HelpfulUnhelpful - A
Andrew Vermeesch
May 03, 2025
Weidmuller Power Supply CP DC UPS 24V 20A 1370050010I'm expecting to receive this product soon.HelpfulUnhelpful - M
Mark S Dejong
Nov 11, 2024
Weidmuller Power Supply CP DC UPS 24V 20A 1370050010The exact part I needed was available and arrived quickly.HelpfulUnhelpful - M
Mike Housel
Sep 07, 2024
Weidmuller Power Supply CP DC UPS 24V 20A 1370050010Haven’t gotten it yetHelpfulUnhelpful - A
Anonymous user
Nov 25, 2022
Weidmuller Power Supply CP DC UPS 24V 20A 1370050010All was ok! No problems whatsoever.HelpfulUnhelpful
Weidmuller Power Supply CP DC UPS 24V 20A 1370050010
✔ In Stock (Can ship in 5-7 days)

Online Support 24/7
12 Months Warranty for New Products
30 Days Money Back Guarantee
People who bought this item also viewed
GE Power Supply GE150/1050/MV-GL
Siemens Power Supply 6EP3437-8MB00-2CY0
Weidmuller Power Supply 9928890005
Rockwell AB Power Supply 1606-XLX240EE
Rockwell AB Power Supply 1606-XLP25A
OMRON Power Supply S8JC-Z01505C
Rockwell AB Power Supply 1606-XLP50E
XINJE Servo Motor MS6H-130TL15B2-41P3
Inovance Servo Drive IS620PS5R5I-L
Danfoss Transmitter 060G1470
Ziehl Abegg Fan RH50V-ZIK.DG.1R
OPG Electric Motor 6IK200RGU-CF
Winyao NIC Card WY576F1SFP
Fanuc I/O Module A06B-6061-C201
SCHMERSAL Relay SRB301MC-ST-24V
NTCCA Battery NP12-28AH
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
IVZ Bearing 241/600
BANDO Belt A-58
Allen Bradley PLC 1756-L8SPK
NSK Bearing 1213 K
Sanyo Denki Servo Motor P50B07050DCLCU
SKF Bearing 51436
Mitsubishi Servo Motor HF703BS-A47
Sanyo Denki Fan 9GV0612P1M03

