YEESEN Vane Pump VP-30-FA3

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/21/2020

Factors affecting heat transfer on the refrigerant side

1.Flow direction and velocity of steam In the condenser, when the refrigerant vapor contacts the low-temperature wall surface, it exotherms and condenses into a liquid film, and flows downward under the action of gravity.

07/01/2020

Three major causes of compressor cracks in winter

Three major causes of compressor cracks in winter When using the compressor in winter, we may encounter some problems, such as cracks in the compressor body. There are many ways to cause cracks in the compressor. After summing up, the specifics can be summarized as the following three points:

06/14/2020

Brief introduction of magnetic suspension refrigeration compressor technology

Magnetic bearing is a high-tech product. Due to its high price, it was only used in aerospace engineering in the past. In 1993, Australia Multistack established a TURBOCORRD department, specializing in the application of magnetic bearings in refrigerationﰸ2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦隆
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ
00븹먱댁珵理뛐珵Љ
䕄ྦ￿￿뤂ᐱ變뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់變ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV

09/08/2020

The difference between air-cooled and water-cooled screw air compressors

The difference between air-cooled screw machine and water-cooled screw machine: 　　The oil cooler of the air-cooled screw compressor and the compressed air after-cooler are made into one body. It is an aluminum plate-fin structure and brazed in a vacuum furnace. Once the oil leaks, it is almost irreparable and only replaced. The working principle is that hot oil and high temperature (about 80℃) gas flow in their respective pipes,

08/14/2020

Three commonly used monitoring indicators for refrigeration compressor lubricants

The lubricating oil used in the compressor is very critical, and the detection of lubricating oil and its replacement cycle are also closely related to the process control in the production process.

11/14/2022

How to Install an Industrial Exhaust Fan?

Factory production emits a lot of waste gas, and there are many workers gathered. For the sake of worker health and safety concerns, some exhaust fans are installed in factories to discharge exhaust gas.

09/06/2020

Classification of solenoid valves

Direct acting solenoid valve 　　 Introduction: 　　There are two types: normally closed and normally open. The normally closed type is closed when the power is cut off.

09/01/2020

Analysis of three states of mechanical lubrication

There are three types of lubrication: full film lubrication, boundary lubrication, and mixed lubrication. They are in three different states, but they all rely on lubricating oil to lubricate and resist wear.

06/18/2020

Why does the return air inlet of the refrigeration compressor of the high and low temperature alternating humidity and humidity test chamber frost

Why does the return air inlet of the refrigeration compressor of the high and low temperature alternating humidity and humidity test chamber frost High and low temperature alternating humidity and humidity test chamber refrigeration compressor frost retu器2䀀
ￜ皥
䖒皦즠Ʋ㉄ᰙ㲈Ʋ
䌁皦
ᮔDž༬皧㉎ᰙЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧є識�僬