YUKEN Vane Pump PV2R12-17-59-L-REAA-42

07/05/2020

Building & Construction Hold Over 20 % Share in Portable Air Compressor Market 2019 to 2027

LOS ANGELES, United States: QY Research published latest market research report on global Mute Oil Free Air Compressor market 2020 with industry detail study, growth analysis, latest and future trends, leading companies analysis, regional analysis and forecast by 2026.

06/21/2020

Which is better, semiconductor refrigeration and compressor refrigeration

Which is better, semiconductor refrigeration and compressor refrigeration <img src="{{media url=&quot;o4YBAF3LcwuAC1ILAAEzxLDPcHA979.jpg&quot;}}" alt="" />Semiconductor refrigeration 　　Semiconductor refrigerator refers to a device that uses the thermo-electric effect of semiconductor to produce cooling capacity, also known as thermoelectric refrigerator. Connect two different metals with conductors, and connect direct current, then the temperature at one contact will decrease and the temperature at the other contact will increase.

08/16/2023

Pros and Cons of Heat Pump vs Gas Furnace: Which is Better for Your Home?

As winter approaches, many homeowners are faced with the question of which heating system to choose for their home. The two most popular options are heat pumps and gas furnaces. Each has its own set of advantages and disadvantages.

06/14/2020

Newly installed air conditioner, it trips when plugged in, what's going on

Newly installed air conditioner, it trips when plugged in, what's going on This question is about the problems that occur when the newly purchased appliances are used for the first time.

06/29/2020

Compression ratio of American Copeland compressor

06/20/2020

What are the causes of air conditioning trip

What are the causes of air conditioning trip 1. The contradiction between the rated current of the air conditioner and the current carrying capacity of the wire. 　　Here are two formulas involved: 　　①The rated current of air conditioner I=P÷U ÷power factor, the power remains unchanged, the smaller the voltage, the greater the current required. 　　② The current carrying capacity of the wire I=U÷R, the voltage is proportional to the current. 　　 So when the power supply voltage is normal, we must consider the line voltage drop. The longer the line, the greater the resistance, the greater the voltage drop, and the smaller the output current at the end. However, because the power of the load remains unchanged, the voltage becomes smaller, and the current that needs to be output will be larger. At this time, the wire is forced to overload, and the time will cause heating, and eventually cause the tripping of the open circuit. 　　 Some friends said that the heat of the wire will not cause the tripping of the circuit breaker. In fact, the manufacturer of the air switch has made it clear in the relevant manuals that the heat of the wire will cause the air switch to trip. Because the wire heats up, the crimp terminal will also heat up, and the resistance will become larger and larger. The larger the resistance, the greater the current consumption, and the hotter it will be, a vicious cycle. 　　 2. Leakage 　　During the daily maintenance work, we will encounter the situation that the air circuit trips due to the leakage of electricity. At least I have not experienced it once or twice. Regardless of the leakage of the neutral line or the leakage of the live line, a long time will cause the circuit breaker to trip. 　　Why does the electric leakage cause the MCB to trip? There are two situations. 　　 ① Good grounding. At the beginning, the leakage current was not large, and as time went by, the leakage current became larger and larger, and eventually evolved into a short circuit to ground, unable to close. 　　②There is no ground wire. If the equipment is not connected to the protective ground, when the wire leaks to the equipment, it is equivalent to adding a large shunt resistance. Like this problem, if the air conditioner does not have a ground wire, when the wire leaks to the air conditioner, the air conditioner is a very large shunt resistor and will consume a lot of current. Eventually, the wire will heat up or trip open. 　　How to determine whether the trip caused by the above two aspects can be done with a clamp ammeter. 　　 ① Measure the voltage at the input and output to see if there is a significant change in voltage drop. 　　②Measure whether the output current exceeds the standard. 　　 So my suggestion is: first measure the supply voltage to see if it is within the allowable fluctuation range. Then measure the current to see if it exceeds the rated ampacity of the wire. Finally, check the data one by one according to the measured data to find out the reason.

06/24/2022

HMI Troubleshooting and Maintenance?

HMI (human-machine interface) devices are crucial components of automated systems. An HMI makes it possible for a human to interact with a machine efficiently and productively.

10/18/2024

Automobile Knowledge: What Are VVT, CVVT, DVVT, VVT-i, and VVT-iW?

VVT, CVVT, DVVT, VVT-i, and VVT-iW are often seen on many automobile engines. What do these logos mean? These logos reflect some of the unique technologies of automobile engines.

07/16/2022

What is a Gear Pump

Gear pump is a rotary pump that transfers liquid or pressurizes it relying on the change and movement of the working volume formed between the pump cylinder and the meshing gear.

08/02/2020

How to debug McQuay air conditioner noise

Noise caused by thermal expansion and contraction when the wall-mounted machine is working: The noise caused by the stepper motor and the synchronous motor. The main reason is that the internal gears of the motor are poorly matched to form abnormal noise.