ADDA Fan AD0812HB-C76

08/04/2020

How much should the temperature on the refrigerator be set What can be done to ensure cooling and power saving at the same time

There are two ways to set the temperature of the refrigerator, I will talk about them separately. Generally divided into 5 gears (1~5) or 7 gears (1~7), and some even more.

06/29/2020

Compressor protection measures against liquid strikes

Compressor protection measures against liquid strikes When too much liquid enters the cylinder and it is too late to discharge it from the exhaust valve, a liquid blow will occur in the cylinder. The high pressure generated during the liquid blow damages the cylinder, piston, connecting rod, etc., so it is necessary to take a Series of protective measures.

09/05/2020

The technical core that affects the development and use of cold dryers

The application of refrigeration dryers is very extensive. This article is to describe the core technology, important fields and development directions of refrigeration dryers to describe the core of the technology that affects the development and use of refrigeration dryers.

08/17/2020

Causes of high energy consumption of industrial chillers

Nowadays, the production technology of industrial chillers is more advanced, and the safety and stability of operation are more guaranteed. However, the problem that plagues many companies is the continuous increase in energy consumption.

06/25/2023

How to Tell if LG Refrigerator Compressor is Bad: Symptoms, Problems, and Solutions

The compressor is the heart of any refrigerator, including LG models. It is responsible for compressing the refrigerant gas and transferring heat from the inside of the refrigerator to the outside.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

06/14/2020

Knowledge of maintenance of air energy heat pump

Knowledge of maintenance of air energy heat pump The air energy water heater is composed of an outdoor unit and an insulated water tank. The outdoor unit is called an air energy heat pump unit.

04/15/2024

13 Common Servo Motor Faults: Causes and Troubleshooting Methods

Servo motor is a device that can convert electrical energy into mechanical energy. It can accurately control speed and position and is an important part of the servo system.

08/24/2020

What kind of equipment is suitable for high and low pressure refrigerant charging method

There are generally two types of refrigerant charging methods: low-pressure charging and high-pressure charging. The advantage of the low pressure charging method is that it is easier to control the amount of refrigerant charged,

07/31/2020

Apply these 5 parameters to easily determine whether the refrigeration and air conditioning system is operating normally!

Condensing pressure is the pressure at which the refrigerant condenses into liquid in the condenser. Since the pressure inside the condenser in the refrigeration system cannot be measured, in fact, the pressure drop of the refrigerant in the exhaust pipe and the condenser is actually very small.