How to clean the rain test box

How to clean the rain test box After using the box-type rain test box, and regular cleaning is a very important work, I believe many customers will not be unfamiliar. The internal cleaning of the box-type rain test box is the top priority. Let's take a look with the editor. Cleaning items of box rain test box: 1. The nozzle inside the studio should be dried after every use, because long-term accumulation will cause the nozzle to block. 2. Bearing and transmission chain should be lubricated with lubricating oil every season. 3. The filtration level should be cleaned with salt water, specifically, each bottle with 4 pounds of salt, soaked for 24 hours. 4. Control the glass layer and operation panel with general cotton cloth or old packaging and wipe it gently. 5. The floor in the tank and the outside of the equipment should be cleaned with ordinary floor cleaner and cloth respectively. 6. After a long time in the power distribution room, a lot of dust will accumulate, so the time may cause the failure of the device. Therefore, it is necessary to clean the meters, water circuits, and power distribution boards in the power distribution room regularly. It is recommended to clean them once a month. At that time, it should be noted that the power should be turned off during cleaning to avoid accidental electric shock. 7. For the water left in the device after the test, if it is not wiped clean, it will affect the test accuracy of the device. At this time, use a soft cloth to wipe, and do not close the door in time after wiping clean. The door should be opened and ventilated, and wait a while before closing the door. Only correct and regular cleaning of the inside of the box rain test box can ensure that the equipment can achieve the most accurate test data during the test, otherwise it will greatly increase the test time. However, if the equipment is not cleaned for a long time, it will cause the equipment to malfunction and affect the results of the experiment.