Fluid: Air(to be filtered by 40u m filter element)
Mounting type: Basic FA FB CA CB CR LB TC FTC TCM1 TCM2 Operating pressure: 0.15 to 1.0 Mpa(22 to 145psi)(1.5 to 10.0bar) Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(degrees Celsius): -20 to 70
Speed range(mm per second): 30 to 800 or 30 to 500
Cushion type: Variable cushion
Bore size:40mm
Stroke:150mm
Magnet:with magnet
AirTAC Air Cylinder Pneumatic SAI40X150SDouble acting type
People who bought this item also viewed
CKD Air Cylinder SCPG2-M-00-10-30
AirTAC Air Cylinder HLS12X30-S
AirTAC Air Cylinder HLH6X20S
Festo Air Cylinder DSNU-32-25-P-A-S2
Festo Air Cylinder DFM-40-25-P-A-GF
Festo Air Cylinder ADVU-12-20-A-P-A
Festo Air Cylinder DNC-40-30-PPV-A
SMC Solenoid Valve SV3000-60-5A-1A
Johnson Controls Actuator M9206-GGC-2MP
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
KSK Oil SealTC(NBR)340X380X18
KAB Printing Machine Parts L2670114
LG LS PLC Temperature module XBF-RD01A
ADDA Fan AD0812UB-A71GL
SKF Oil Seal 8X18X7 HMSA10 V(FKM)
Recent related posts
-
11/10/2022
3 Common Expansion Valve Failures and the Solutions
The most common failures in the use of expansion valves are valve blockage, frosting, ice blockage and oil blockage.
-
07/04/2022
What is a Magnet Pump?
Magnet pumps are seal-less pumps that use the technology of a drive magnet and inner magnet connected to an impeller to move fluid through the pump.
-
12/06/2020
The working principle of oxygen generator (oxygen machine)
The working principle of oxygen generator (oxygen machine) The oxygen generator adopts pressure swing adsorption (PSA)-pressure adsorption and atmospheric pressure desorption (HP) method. After the raw material air is pressurized by an oil-free compressor,
-
07/19/2020
The function and working principle of oil separator
The role of the oil separator in the chiller; In the vapor compression refrigeration system, the compressed ammonia vapor (or freon vapor) is in a high-pressure and high-temperature superheated state. Because of its fast flow rate and high temperature when it is discharged. Part of the lubricating oil on the cylinder wall is inevitably
-
06/14/2020
What should I do if the refrigeration compressor has serious frost
1. The frost on the compressor return air port indicates that the temperature of the compressor return air is too low, so what will cause the compressor return air temperature to be too low?
-
09/07/2020
Air compressor industry application-spraying industry
Air spraying is a coating technology widely used in the spraying industry. Compressed air is the main power source of the air spray system. The method of using compressed air to atomize the paint through a spray gun is widely used in various industries such as automobiles, hardware, and furniture.
-
03/11/2021
The main circuit fuse fusing is a common fault of SCR servo driver. The causes of fuse fusing are as follows
The "phase sequence" of power incoming line is incorrect. Due to the synchronization problem between the trigger pulse and the main circuit of SCR servo driver, there are strict requirements on the "phase sequence" of the input power supply. If the "phase sequence" is not correct, connecting the power supply may immediately cause the fuse of the main circuit of the driver to blow.
-
06/14/2020
What effect does pressure and temperature have on the refrigeration system
The refrigeration system has a failure, and the operating status of the system is generally understood by looking, listening, and touching.
-
06/13/2020
Causes and harms of non-condensable gas produced by refrigeration system
Non-condensable gas refers to air, hydrogen, nitrogen, lubricating oil vapor, etc. mixed in the refrigeration system.
-
09/10/2020
Regular maintenance and maintenance of Fusheng air compressor
1. Regular maintenance and maintenance of main components In order to enable the air compressor to operate normally and reliably and ensure the service life of the unit, a detailed maintenance plan must be formulated, manned operations, regular maintenance, and regular inspection and maintenance are required to keep the air compressor unit clean, oil-free, and dirt-free.