The working principle of oxygen generator (oxygen machine)

refrigeration compressor,compressor,Mitsubishi Compressor,Bristol Compressor,HITACHI Compressor,Danfoss compressor to solve the problem

The working principle of oxygen generator (oxygen machine)

The oxygen generator adopts pressure swing adsorption (PSA)-pressure adsorption and atmospheric pressure desorption (HP) method. After the raw material air is pressurized by an oil-free compressor, it passes through an air filter device to remove dust and other solid impurities. The processed compressed air enters the adsorption tower equipped with desiccant and molecular sieve through the intake valve. The nitrogen and carbon dioxide in the air are Adsorption, the outflow gas is high-purity oxygen...

Recent related posts

12/06/2020

The working principle of oxygen generator (oxygen machine)

09/06/2020

New type filter for screw compressor-oil bath air filter

In the environment with high dust concentration in the air, the dust removal filter device used by the screw compressor is mostly paper or fiber material. The accumulation of dust particles is easy to block, and frequent shutdowns are required to replace filter materials.

09/14/2020

What are the reasons for the high temperature of the air compressor

The air compressor is a transmission machine. If the equipment running at high speed is not properly lubricated or cooled, it will inevitably produce high temperature. Excessive temperature will cause changes in the physical coefficient values of the rotor and bearing materials, and in severe cases, the entire main engine will bite.

09/14/2020

Thoughts on reading classic stories

Known as the'Japanese rope king', Neji Shimamura bought a large amount of hemp rope at a unit price of five cents, and then sold it to paper bag factories in Tokyo at the original price, thus winning the favor of "Neiji Shimamura's rope is really cheap." reputation.

09/14/2020

Selection guide for air compressor

Selection of working pressure (exhaust pressure): When the user is preparing to purchase an air compressor, first determine the working pressure required by the air end, add a margin of 1-2 bar, and then select the pressure of the air compressor (the margin is considered from the air compressor The pressure loss from the installation site to the actual gas end pipeline distance, according to the length of the distance between 1-2 bar, appropriately consider the pressure margin)