Fluid: Air(to be filtered by 40u m filter element)
Mounting type: Basic FA FB CA CB CR LB TC FTC TCM1 TCM2 Operating pressure: 0.15 to 1.0 Mpa(22 to 145psi)(1.5 to 10.0bar) Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(degrees Celsius): -20 to 70
Speed range(mm per second): 30 to 800 or 30 to 500
Cushion type: Variable cushion
Bore size:50mm
Stroke:275mm
Magnet:without magnet
AirTAC Air Cylinder Pneumatic SAI50X275Double acting type
People who bought this item also viewed
MINDMAN Air Cylinder MCQV2-11-40-200
Festo Air Cylinder CRDNG-125-100-PPV-A
AirTAC Air Cylinder ACQ32X25S
AirTAC Air Cylinder SC63X1000
AirTAC Air Cylinder SE32X75
AirTAC Air Cylinder TN16X25S
Festo Air Cylinder DSNU-16-30-PPV-A-S2
Festo Air Cylinder DNC-100-125-PPV-A
Festo Air Cylinder ADNGF-12-60-P-A
Festo Air Cylinder DFM-12-10-B-P-A-KF
CKD Solenoid Valve AB41-02-5-F2E-DC24V
Johnson Controls Actuator M9106-AGC-2
Bellofram Proportional Valve 969-741-000
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
KCL Vane Pump VQ435-200-108-F-RAAA-02
Allen Bradley Servo Drive 2093-AMP5
EVERFLOW Fan R124010DM
ARK Air Cylinder KCDUJB8-30D
Recent related posts
-
07/07/2020
Quick look Small chillers summer maintenance tips
Quick look! Small chillers summer maintenance tips The high-temperature summer is a frequent season of safety production accidents, which affects the cooling effect of small chillers to a certain extent. Therefore, in order to reduce the equipment failure time and the losses it brings, we must always pay attention to the impact of high temperature on the small chiller equipment, and do a good job in the summer maintenance of the small chiller.
-
09/01/2022
Differences between a Contactor and a Relay
The contactor and the relay are all control devices used in electric circuit. But they cannot replace each other. The followings are the main differences between the two.
-
02/27/2021
Debugging method of servo motor
Before wiring, initialize the parameters. On the control card: select the control method; clear the PID parameters; let the default enable signal turn off when the control card is powered on; save this state to ensure that the control card is in this state when it is powered on again.
-
06/28/2020
Compressor-Hitachi 3p cold storage compressor
Compressor-Hitachi 3p cold storage compressor How to distinguish the big feet of Guangzhou Hitachi inverter fixed frequency compressors? The busier the production, the more problems. Recently, many customers are asking us if Guangzhou Hitachi Inverter Fixed Frequency Compressor still has big foot machine and small foot machine? How to distinguish?
-
08/20/2020
Selection requirements for refrigeration piping parts of chillers
The accessories of the refrigeration pipeline of the chiller mainly include various valves and connectors. According to different refrigeration systems, chillers have different requirements for piping accessories.
-
08/19/2020
How to choose the correct cold storage condenser
The condenser is one of the main heat exchange equipment in the cold storage refrigeration system, and its function is to cool and condense the high-temperature refrigerant superheated
-
09/15/2020
Screw machine cleaning agent and protective agent and information
Synthetic cleaning oil, environmentally friendly product, powerful cleaning function and lubrication.
-
06/30/2020
How to keep unassembled air-conditioning compressor
How to keep unassembled air-conditioning compressor No matter what brand of air-conditioning compressor maintenance and maintenance methods are roughly the same. The premise of this maintenance is after installation. And how should we keep the unassembled air-conditioning compressor?
-
07/29/2020
Nine refrigerant leakage locations and solutions
There are many welds on the left and right sides of the evaporator, and there may be more leaks. The leak of the newly installed air conditioner is mainly due to the poor welding skills of the employees of the air conditioner manufacturer.
-
01/28/2022
Refrigeration Compressor Frosting Reasons & Solutions
When we use the refrigeration compressor, there could be frosting. It’s a failure that we can solve.