Copeland Compressor ZR380KC-TWC-522

08/19/2020

Which chiller is suitable for high temperature areas or poor water temperature

The chiller provides a constant current and constant pressure circulating cooling water flow to meet the needs of the water cooling instrument. The chiller can ensure the normal operation of the instrument and achieve the purpose of water saving due to the pre-filled high-quality water circulating in the machine.

06/29/2020

How the compressor works

09/17/2020

Discussion on Waterless Lubrication Modification of Nitrogen Compressor

With the rapid development of industry, nitrogen has been widely used in the fields of chemical industry, electronics, metallurgy, food, machinery and other fields. my country's demand for nitrogen is increasing at a rate of about 20% every year.

09/08/2020

What are the application areas of air compressors

In which industries are air compressors popular? As a general-purpose equipment in the new era, air compressors are inseparable from any gas demand. Below, let's take a look at the application areas of air compressors!

08/15/2020

Precautions during the use of air-cooled refrigerators

Before using the air-cooled chiller, you can carefully count the operating data of the equipment, and then based on these operating data, you can make a basic judgment on the operating status of the equipment,

06/30/2020

Common faults and causes of compressors

Common faults and causes of compressors Common compressor failures are as follows: 　　L. The compressor cannot start normally 　　 The power supply voltage is too low, the motor circuit is poorly connected, or the exhaust valve is leaking, resulting in too high pressure in the crankcase. The energy regulation mechanism has failed.

09/15/2020

Maintenance steps and methods for air filters above GA90

1. Stop the unit and press the emergency button. 2. Clean the surface of the air filter housing. 3. Remove the lock nut and washer from the screw rod. 4. Take out the air filter.

07/19/2020

On the cause of the chiller compressor burning down

On the cause of the chiller compressor burning down During the use of the chiller, sometimes the irresistible external force or misoperation will cause the compressor to burn out. Once the compressor is found to be burned, it must be stopped immediately to avoid damage to other parts.

08/15/2020

Energy saving ways and methods for cold storage

1. Optimize energy saving from a design perspective 　　 (1) Reasonably determine the control temperature of the design cold storage, and reduce the temperature difference between the return air.

03/02/2021

Advantages and disadvantages, function and service life of brushless motor

Advantage: (1) No brush, low interference When the brush is removed from the brushless motor, the most direct change is that there is no electric spark generated when the brushless motor is running, which greatly reduces the interference of electric spark to the remote control radio equipment.